Table of Contents
Advertisement
Media Rack
Hardware/Software
10. Now, you have already installed CMI8330 sound card on Microsoft
Windows NT 4.0 successfully.
If you want to install Windows applications of CMI8330, Please follow the
following steps:
1. Click "start" key.
2. Select "Run" item.
3. Please make sure your CMI8330's Windows NT driver disk is in floppy
A(or B).
4. Please Key in the path name of Windows NT applications install program
as "A:\NTSETUP.EXE"
If you want to use MPU-401 MIDI device, please follow the steps describe
above. But in steps 4, select "MPU-401 MIDI compatible driver" item. Specify
the path of Windows NT 4.0 CD-ROM directory \I386, system will add
MPU-401 MIDI device for you.
5.2 Installing the Windows NT4.0 PnP/ full-duplex
drivers
1. How to activate NT4.0 PnP functions?
If your NT4.0 system PnP functions are inactive, you can use Windows
explorer to find PNPISA.INF (it should be in NT4.0 CD directory
\DRVLIB\PNPISA\X86). Select it and press mouse right button. Select 'Setup'
item, NT4.0 system PnP functions will activate, and the system will ask you to
reboot the PC.
2. How to remove old audio drivers?
If you have installed the old audio NT4.0 drivers, please remove WSS device in
'Audio Devices' of 'Advanced' page of 'Multimedia'. Shut down system to DOS,
change directory to NT subdirectory INF, then search OEM*.INF files, delete
our INF file. Delete all of old audio drivers in SYSTEM32 and
SYSTEM32\DRIVERS subdirectory. Then reboot the PC, NT system will
automatically detect our audio adapter (If not, please activate NT PnP
functions first!), please follow those steps described later to install drivers.
Section 5- Installation of Windows NT 4.0
27
System Mixer
Advertisement
Table of Contents
