Table of Contents
Advertisement
Media Rack
Installation of the CMI8330
2.1 Installing the CMI8330 into your
WARNING: Before installing the CMI8330, you should familiarize yourself
with major parts of it. Improper use of it may cause permanent damage to itself
and/or your PC and/or external equipment's.
Please follow the steps carefully for a typical system.
1. Turn off your computer and disconnect all power cords.
2. Remove the cover from your computer. Refer to your computer system user's
guide for more details.
3. Choose an empty 16 bit ISA slot. (Preferably away from other cards to cut
down on noise and interference).
4. Remove the expansion slot cover by unscrewing slot cover screw. Keep the
screw for later use.
5. Pick up your CMI8330 by its top edge. Firmly slide the CMI8330 into the
slot. Anchor the CMI8330's mounting bracket with the screw you kept from
step 4.
6. Put the computer cover back on and reconnect the power cords.
Note: At step 5, if the CMI8330 will not slide in smoothly, do not force it.
Make sure the CMI8330 is lined up properly, and try again. You may need
to loosen the adjacent slot's rear cover to make the CMI8330 fit properly.
Computer
7
System Mixer
CMI8330
2
Advertisement
Table of Contents
