Table of Contents
Advertisement
Media Rack
Finally use the MIC test function in IPHONE to assure the volume
table of the MIC will re-act.
2) Please set the "recording device" and "playback device" under
IPHONE to "WSS(534)".
3) Set the "record and playback" under Win 95 to WSS(534) too.
Q8: I've already setup "Full-Duplex" in IPHONE, but why the
sound card still works like "Half-Duplex"?
A8: Please note that there must be Full Duplex's on both sides of IPHONE
users then Full Duplex can work properly.
Q9: Why there are no sound on MIDI play in Windows?
A9: Perhaps, you don't have wave-table synthesizer, but your MIDI device
set to MPU-401.
Please check by following procedure:
1. Click "Start", "setting", "control panel"
2. Double click "Multimedia"
3. Select item "MIDI"
4. Check the informat of "Single instrument', in normal case, it has:
"C-Media inc. External MIDI (MPU-401)"
"OPL2/OPL3 FM Synthesis" (Default device for MIDI)
5. Make sure, your are setting to "OPL2/OPL3 FM Synthesis"
Q10: Why there are no sound or a little bit sound when using
speaker that no power amplifier?
A10: Please connect to loudspeaker for more powerful sound.
Q11: Why there are repeat sound playing while Windows
starting?
A11: I/O(IRQ、DMA) conflicted with others adaptors! Please adjust I/O
resource of all interface card, especially non-PnP cards.
35
System Mixer
Advertisement
Table of Contents
