Table of Contents
Advertisement
Media Rack
Hardware/Software
Control types and names vary. Some common types are listed below:
Vol: The master control for all outputs. The strength of an output signal is
determined by both the Vol slider and the slider for the individual output.
To affect all outputs, move the Vol slider. To change the output of an
individual output type, move its slider.
Line-in: Controls the audio hardware's Line In or Line Out levels. Line
levels might be for an externally attached cassette player, e.g.
Mic: Controls the microphone input level.
Wave: Controls wave (voice) playback or record levels.
FM: Controls the FM music play or record level.
Synth: Controls the external MIDI synthesis(wave table) play or record
level.
CD: Controls the CD drive output level, for CD drives configured to play
their audio output through the PC's audio hardware.
Dig-CD: Turn on or off the CD drive digital audio output.
3D Snd: Toggle the 3D surround sound effect.
Loud: Toggle the output loudness gain.
Mute Buttons: Toggle between muting and enabling the signal. A button with
a lit LED is enabled, while one with its LED not lit is muted. Several output
signals can usually be enabled at once.
Section 6- Audio Rack
32
System Mixer
Advertisement
Table of Contents
