Dos Utilities Installation Only; Set Dos Environment Variables For Sound Blaster Compatible - PC Chips CMI8330 English Manual

Media Rack
Hardware/Software
8. Program will launch Windows 3.1 to install device drivers and
applications.
9. Please restart PC after installation completed.
P.S. :
1. After installation, if you want to change I/O of Windows device drivers,
please execute file CMINIT.EXE to adjust item 'WSS I/O','WSS IRQ' and
'WSS DMA'.
2. If you didn't install Windows applications (only install DOS utilities) this
time, run 'WSETUP.EXE' in disk root directory to install Windows
applications.

2.3 DOS Utilities Installation only

To install DOS utilities only , please follow steps that described above. Press
ENTER key when asking Windows path for none.
2.4 Set DOS environment variables for Sound Blaster
compatible
The CMI8330 is compatible with Sound Blaster, so you can execute programs
which can run with it. Some games or applications need read hardward setting
from DOS environment variables 'BLASTER', CMINIT.EXE will
automatically add to AUTOEXEC.BAT for you. You can check value in
AUTOEXEC.BAT with CMINIT.EXE shown. It like below :
SET BLASTER = A2x0 Iy Dz Hv T4
x = 2 or 4
y = 5 or 7 or 9 or 10 (This is voice(SB) IRQ number)
z = 0 or 1 or 3
v = 5 or 7
Section 2- Installation the CMI8330
(This is voice(SB) I/O address number)
(This is voice(SB) DMA number)
(This is voice(SB) 16 BIT DMA number)
10
System Mixer