Dos And Windows 3.1 Applications Installation - PC Chips CMI8330 English Manual

Media Rack
Hardware/Software
Table 2.2 Connector function
Connector
J1
J2
J4
LINE
MIC
SPK

2.2 DOS and Windows 3.1 Applications Installation

Please make sure that your hard disk has 4MB free spaces at least. Insert the
drivers disk.
1. Change to DOS/W31 drivers directory, type in
INSTALL [Enter]
2. Type DOS utilities path that you want to install.
3. Type the path of Windows 3.1 when asking Windows path.
4. Program will expand file to path that you specify.
5. After expanding DOS utilities, program CMINIT.EXE will be executed
and showing current value of all I/O. Please adjust I/O to avoiding conflict,
if you were in non-PnP mode. Press ESC key to exit.
6. Mixer program CMMIX.COM will be executed too. You can adjust default
volume to your favorite value. Press ESC key to exit.
7. Install program will continue execute testing program CMTEST.EXE to
check output of sound card.
Connect Wave Table Upgrade Board (optional)
Connect with joystick or MIDI cable
Connect IDE/Sony CD-ROM Audio output
Connect with the audio output(line-out) from stereo
Connect with microphone(mono)
Output to speaker or audio-in of stereo
Section 2- Installation the CMI8330
Function
9
System Mixer