Table of Contents
Advertisement
Media Rack
Installation of Windows NT 4.0
ATTENTION:
1. We recommend that you have already installed Windows NT 4.O before
installing CMI8330. And you didn't install any other sound card device
drivers in your current system.
2. Please make sure your PC BIOS PnP AUTO CONFIG is set to ENABLE,
if your PC BIOS supports PnP function.
3. If you got any problem with installing Windows NT 4.0, please contact
your local Windows agent.
5.1 Installing the Windows NT4.0 non-PnP drivers
Please follow the following steps to install CMI8330 device drivers into
Windows NT 4.0.
1.
Click "Start" button, move highlight bar to "Setting", select "Control
Panel".
2. Double click "Multimedia" icon.
3. Select "Devices" page and press "Add" button.
4. Select "Unlisted or Updated Driver" item in "List of Drivers".
5. Specify path that NT drivers is in (ex. A:\).
6. Select "C-Media CM8330" item and press "OK" button.
7. Select proper value of I/O.
8. Press "OK" button.
9. Restart system when asking.
26
System Mixer
CMI8330
5
Advertisement
Table of Contents
