Table of Contents
Advertisement
Media Rack
Hardware/Software
In main menu, you can use arrow keys to select items that you want to change.
The sub window will display the I/O you can select. If any PCI or PnP card use
this I/O , item will grey to avoiding conflict and display the PnP card title that
use it. In Windows 95, "DOS prompt" or "shut down to DOS" are still in
Windows 95 protected mode, changing I/O by user are not expected. So
program will display current value of all I/O, called "status" mode.
At DOS prompt, type CMINIT [Enter]
You can see all I/O settings in the main Menu.
WSS Base I/O Address ......... Select WSS mode base I/O address
WSS IRQ Channel ................. Select WSS mode IRQ channel
WSS DMA Channel ............... Select WSS mode DMA channel
Voice I/O Address .................. Select SB mode base I/O address
Voice IRQ Channel ................ Select SB mode IRQ channel
Voice DMA Channel .............. Select SB mode DMA channel
Voice 16bit DMA Channel ..... Select SB mode 16-bit DMA transfer channel
MPU-401 MIDI Device ...... Enable or Disable MIDI device
MPU-401 I/O Address ............ Select MIDI base I/O address
MPU-401 IRQ Channel .......... Select MIDI IRQ channel
Game Port I/O Address.......... Display Game Port base I/O address
FM(OPL3) I/O Address .......... Display FM(OPL3) base I/O address
Using arrow key to move to the item that you want to change and press
[ENTER] key to execute. To quit or save change, press [ESC] key.
Program will automatically update file "AUTOEXEC.BAT" if selecting "save
setting & exit". Otherwise, it will remain unchanged. Once you save the
change, a new I/O setting will be got ever since.
P.S.: The arguments after CMINIT in the file AUTOEXEC.BAT are updating
by file CMINIT.EXE.
Hardware/Software
Section 3- Utilities Software
Section 3- Utilities Software
12
System Mixer
Advertisement
Table of Contents
