Setup Menu > Instrument Setup - Fluke 5560A Operator's Manual

Setup Menu > Instrument Setup
The Instrument Setup menu (Setup Menu > Instrument Setup) is the second choice of the list of
submenus shown on the left of the Setup Menu. Parameters are nonvolatile and remain set after you
reset the Product or when the Product power is turned on.
There is a scrollbar on the right of the screen. Place your finger anywhere on the active section
of the display and drag your finger to move the screen content.
The Instrument Setup menu includes:
• Output Limits
• Set or view the upper and lower ac and dc voltage and terminal current limits.
• Restore Limit Defaults
• Defaults
• Set or view the Product defaults
The Product Setup Choices are in Table 7.
Parameter
[1]
Thermocouple Type
RTD Type [1]
[1]
Temperature Unit
[1]
Temperature Scale
dBm Reference [1]
Verification Interval
Confidence Level
Error Reference
Reference Clock
Multi-Unit Phase Synchronization Button
Error Unit
Reference Phase Default
Scope Overload Default
Show Secondary Specifications
Restore Factory Defaults
[1] Changes to these default values does not affect the current active setting until you Reset, Power Cycle, or re-select the
function through the function menu.
Table 7. Product Setup Choices
A1 (BP, A), B, C, D, E, G, J, K, L, N, R, S, T, U, XK, J, N,
T, 10μV/°C, 1mV/°C
Pt 100 (3926), Pt 100 (3916), Pt 100 (385), Pt 200 (385),
Pt 500 (385), Pt 1000 (385),
Ni120 (672), Cu10 (427), Cu50 (428), Cu100 (428)
° C/ ° F
ITS-90, IPTS-68
50,100, 300,1k(dBv), 75,135, 600,1200, 90,150, 900
90 Day, 1 Year, 2 Year
95%, 99%
Nominal Value, True Value
Internal, External
Show, Hide
Scientific Notation, Percent, Parts Per Million (x 10-6):
when <10 PPM, <100 PPM, <1000 PPM
[1] -180.0 to 180.0
1.0 to 60.0 seconds
Show or Hide
-
Note
Setting Choices
Calibrator
Menus
19