Hayman Reese 41312 Installation Instructions Manual

PLEASE ENSURE THAT INSTRUCTIONS ARE UNDERSTOOD PRIOR TO FITMENT
Vehicle Make: Mitsubishi
Vehicle Model: Outlander MY13
Vehicle Type: SUV
CRD Fitted: No
Vehicle Years of Manufacture: November 2012 Production Onwards
General
1. It is recommended that the barrier be fitted by an authorised
2. Read and ensure that the instructions are fully understood before making any attempt to fit this product.
3. Use a suitable stop on drills to prevent drilling through the roof.
4. It is recommended that new installers use masking tape to mark out and confirm location before drilling holes.
Masking tape can also be used as an added protection against trim and carpet damage.
5. Be wary of any changes to vehicle designs or other accessories that may conflict with the fitting of the cargo barrier.
Seat belt anchors must not be located within 100 mm of the anchor plates.
6. Before drilling, ensure that area is clear of fuel, electrical, or other components.
7. Do not attach the barrier to the vehicle using seat belt or a child restraint device or its anchorage.
8. Do not obstruct seat belts, child restraints, or their operation.
9. The rating plaque shall not be removed from the cargo barrier.
10. Use care when applying rust preventative to avoid skin or eye irritation.
11. Use safety glasses when using electric drill and clean up swarf as soon as possible.
12. Cut out the templates along the marked dotted lines and confirm the scale is 1:1 before starting the installation
Tools Required for Installation of this product
7mm diameter drill bit
19mm Vinyl cutter with drill bit arbor (modified hole saw)
Socket & ratchet
Centre punch
Hammer
Scissors
Issue Date 30-07-2013
Hayman Reese (Cequent)
PO Box 4397, Keysborough, Vic 3173
Phone 1800 812 017
HAYMAN REESE
PART No: 41312
CARGO BARRIER
INSTALLATION INSTRUCTIONS
Page 1 of 16
Rating: 60Kg Single Mass
Applicability: Side Curtain Airbag Vehicle
Locations: Behind Second Row Seats
Installation Time: 80min
HAYMAN REESE
dealer.
Masking tape
Marking pen
Deburring tool
Torque wrench
Trim clip removal tool
Vacuum cleaner
Metric socket set
Part No: 41312