Controllers for top-class blast chillers, in split version that can be built into the unit, with 5- or 7-inch colour tft touch-screen graphic display in either vertical or horizontal format (84 pages)
Electronic controllers with 5” or 7” tft graphic display for cabinets, counters and temperature and humidity cold rooms (78 pages)
Summary of Contents for Evco Vcolor 739 M
Page 1
Vcolor 739 M/L Electronic controllers with 5” or 7” TFT graphic display for multifunctional ice cream and patisserie machines WARNING Make sure you read and fully understand the manual before using this device. Non-observance of these instructions may result in death...
3.1 Before you start ...........................15 3.2 Information concerning installation and the surrounding environment ........15 3.3 Dimensions for models mounted with protruding front panel ............16 3.3.1 Vcolor 739 M user interface ........................16 3.3.2 Vcolor 739 L user interface........................16 3.3.3 Base board ..............................17 3.4 Flush mounting model dimensions .....................18...
Page 3
CONTENTS 4.2.2 Vcolor 739 L user interface........................26 4.2.3 Vcolor 739 M/L base board ........................27 4.3 Connection example ..........................28 5. USER INTERFACE .......................... 29 5.1 Interface ...............................30 5.2 Icons ..............................30 5.3 Touch keys ............................30 5.4 Function keys/icons ..........................30 5.5 Using the controller ..........................31 5.5.1 Controller ON/OFF ............................31...
Page 4
9.1 Description of columns in the Table of Parameters .................58 9.2 Table of configuration parameters for Vcolor 739 ................58 9.3 Table of Inverter configuration parameters..................61 10. DIAGNOSTICS ..........................62 10.1 Introduction ............................63 10.2 Table of Vcolor 739 alarms .......................63 10.3 Table of inverter alarms ........................64 144V739E4.00 · Vcolor 739 M/L | 4 | 12/2022...
IMPORTANT INFORMATION Liability and residual risks EVCO assumes no liability for any damage caused by the following (by way of example; this is not an exhaustive list): • I nstallation/useforpurposesotherthanthosespecifiedand,inparticular,notadheringtothesafetyprovisionssetout by current regulations in the country in which the product is installed and/or contained in this manual;...
NOTICE indicates a situation not related to physical injuries but which,ifnotavoided,could damage the equipment. NOTE: t hemaintenance,repair,installationanduseofelectricalequipmentmustonlybeentrustedtoqualifiedpersonnel. QUALIFIED PERSONNEL Only suitably trained and experienced personnel capable of understanding the content of this manual and all documentation regardingtheproductareauthorisedtoworkonandwiththisequipment.Furthermore,thepersonnelmusthavecompleted coursesinsafetyandmustbeabletorecogniseandpreventtheimplieddangers.Thepersonnelmusthavesuitabletraining, knowledgeandexperienceatatechnicallevel,andbecapableofanticipatinganddetectingpotentialriskscausedbyusing theproduct,aswellaschangingthesettingsandmodifyingthemechanical,electricandelectronicequipmentfortheentire systeminwhichtheproductisused.Allpersonnelworkingonandwiththeproductmustbeentirelyfamiliarwiththerelevant standardsanddirectives,aswellassafetyregulations. 144V739E4.00 · Vcolor 739 M/L | 6 | 12/2022...
• Do not use this equipment for machine functions that are critical to safety. • Donotdisassemble,repairormodifytheequipment. • Do not connect wires to unused terminalsand/orterminalsmarkedwiththetext“Noconnection”(“N.C.”). 144V739E4.00 · Vcolor 739 M/L | 7 | 12/2022...
1.4 ACCESSORIES The Vcolor 739 M/L range is supplemented with the following accessories: Type Description Pt1000 temperature probes EVIF25SWX EVlinkingRS-485/Wi-Fimodule CJAV55 Kit for removable terminals on the power base ECTSFD004 Safetytransformer230Vac/12Vac,20VA 0812000002 USBplugtypeAIP65 EVUSB4096M USBflashdrive4096MB 0810500018 USB2.0cable,2m,M/M 0810500020 USB2.0cable,0.5m,M/M EVIF20SUXI NonoptoisolatedRS-485/USBserialinterface 144V739E4.00 ·...
They must be installed in casing or another location designated on the basis of specific environmental conditions andinordertominimisetheriskofinvoluntarycontactwithhazardousvoltage.Usemetalcasingtoimproveimmunitytothe electromagnetic fields of the Vcolor 739 M/L system. This equipment satisfies the EC requirements as indicated in the tables below. WARNING MALFUNCTIONING OF THE EQUIPMENT Do not exceed any of the nominal values specified in this section.
Before you start Information concerning installation and the surrounding environment Dimensions for models mounted with protruding front panel Flush mounting model dimensions Vcolor 739 installation Base power board installation Minimum installation distances 144V739E4.00 · Vcolor 739 M/L | 14 | 12/2022...
• Do not use this equipment for machine functions that are critical to safety. • Donotdisassemble,repairormodifytheequipment. • Do not connect wires to unused terminalsand/orterminalsmarkedwiththetext“Noconnection”(“N.C.”). 144V739E4.00 · Vcolor 739 M/L | 15 | 12/2022...
3.3 DIMENSIONS FOR MODELS MOUNTED WITH PROTRUDING FRONT PANEL 3.3.1 Vcolor 739 M user interface mm (in.) Fig. 1. Protruding front panel Vcolor 739 M user interface dimensions 3.3.2 Vcolor 739 L user interface mm (in.) 47 (1.85) Fig. 2.
3.4 FLUSH MOUNTING MODEL DIMENSIONS 3.4.1 Vcolor 739 M user interface 35 (1.38) 1.9 (0.07) Fig. 4. Flush mounting Vcolor 739 M user interface dimensions 3.4.2 Vcolor 739 L user interface mm (in.) 50 (1.97) 3 (0.12) Fig. 5. Flush mounting Vcolor 739 L user interface dimensions 144V739E4.00 ·...
Vcolor 739 M Vcolor 739 L user interface user interface mm (in.) 130 (5.11) 178.2 (7.01) Fig. 6. Installing Vcolor 739 M user interface with protruding front panel Panel thickness Thispanelthicknessdependingonthematerialusedtomakeit: Material Thickness (X) [mm (in.)] Metal 0.8...1.5 (0.03...0.06) Plastic 0.8...3.4 (0.03...0.13)
142.25 (5.60) Vcolor 739 L mm (in.) R8.1 190 (7.48) Installation result Fig. 7. Flush mounting Vcolor 739 M/L user interface from the rear of the panel Panel thickness Thethicknessofthepanelusedforflushinstallationfromthebackofapaneldependingonthemodel: Model Thickness (X) [mm (in.)] Vcolor 739 M 1.9 (0.07) Vcolor 739 L 3.0 (0.12)
Page 21
Captive screw hole spacing for Vcolor 739 M user interface Themetalpanelusedforflushinstallationfromthebackofapanelshouldtakeaccountofthecaptivescrewstobefittedtoit,in accordance with the following measurements: 78 (3.07) 156 (6.15) Fig. 8. Captive screw hole spacing measurements for Vcolor 739 M Captive screw hole spacing for Vcolor 739 L user interface...
(in.) 40 (1.57) 40 (1.57) Fig. 10. Vcolor 739 M/L user interface minimum installation distances 3.7.2 Base board Observe the minimum distance of 40 mm (1.57 in.) on each side when installing the base board. 144V739E4.00 · Vcolor 739 M/L...
• Do not use this equipment for machine functions that are critical to safety. • Donotdisassemble,repairormodifytheequipment. • Donotconnectwirestounusedterminalsand/orterminalsmarkedwiththetext“Noconnection”(“N.C.”). 144V739E4.00 · Vcolor 739 M/L | 24 | 12/2022...
1=RS-485 BUS LT RS-485 BUS (2) 2=RS-485 RTU LT RS-485 RTU (1) TO BASE BOARD Fig. 13. Vcolor 739 M user interface wiring diagram TERMINALS 30...32 RS-485 RTUSlaveserialportconnection ServiceUSBport(forgraphiccustomization) 34...36 RS-485 fieldbus serial port connection 1=ActivationofRS-485 BUS serial port termination resistor...
Data log View alarm list Change Date and Time Machine info Change language In/out status Output test (EXPERT/OEM ONLY) Internal data reset (EXPERT/OEM ONLY) Parameter management (EXPERT/OEM ONLY) PID setup (OEM ONLY) 144V739E4.00 · Vcolor 739 M/L | 29 | 12/2022...
Used to navigate through screens within the menus At the bottom of the display Used to navigate through screens within the menus 5.4 FUNCTION KEYS/ICONS Key/Icon... HalfloadsolenoidvalveOFF HalfloadsolenoidvalveON Defrost OFF Defrost ON (Full load) (Halfload) 144V739E4.00 · Vcolor 739 M/L | 30 | 12/2022...
28/01/2021 07:31 IMPOSTAZIONI DATA LOG ALARM LIST DATE/TIME FAVORITES SPECIALS PROGRAMS MACHINE INFO LANGUAGE IN/OUT STATUS MACHINE NAME SETTINGS OUTPUT TEST INTERNAL DATA RESET PARAMETERS Fig. 21. Settings menu, EXPERT level 144V739E4.00 · Vcolor 739 M/L | 33 | 12/2022...
Page 34
Machine info √ √ √ Change language √ √ √ I/O status √ √ √ Output test √ √ Internal data reset √ √ View/change parameters √ √ PID setup √ 144V739E4.00 · Vcolor 739 M/L | 34 | 12/2022...
• Date and time at which the recipe was carried out. 5.7.3 Counter log The following information is shown on this screen: • Total machine running time; • Compressor running time; • Heaterrunningtime; • Anycondensercleaningalerts. 144V739E4.00 · Vcolor 739 M/L | 35 | 12/2022...
Fig. 25. Change Date and Time NOTE: only the EU date/time format can be used. 5.10 MACHINE INFO The Machine info screen shows information relating to: • Machinefirmware; • Machine name; • Manufacturer data. 144V739E4.00 · Vcolor 739 M/L | 36 | 12/2022...
The Internal data reset function can be used to: • Restore the parameters to the factory-set default values; • Delete the data log; • Delete machine operating time counter data; • Delete the alarm log; • Delete OEM recipes. 144V739E4.00 · Vcolor 739 M/L | 38 | 12/2022...
INTEGRAL TIME (r15) 100sec DERIVATIVE TIME (r16) 0sec CYCLE TIME (r17) 5sec PARAMETERS Fig. 31. PID setup This function can be used to change the parameters used for PID regulation on heater startup. 144V739E4.00 · Vcolor 739 M/L | 39 | 12/2022...
Filling in the recipe info screen Assigning a product name and photo to the recipe Changing recipe values before the cycle starts or while it is in progress Saving recipe changes 144V739E4.00 · Vcolor 739 M/L | 40 | 12/2022...
• Maximum OFF time that can be set for the mixer arm. NOTE: a maintenance phase can be set with cooling regulation (instead of neutral zone) by setting the density setpoint for the recipe to value 101. 144V739E4.00 · Vcolor 739 M/L | 42 | 12/2022...
The maximum size of the ingredients list is 10 lines of 28 characters each. Description/Preparation The maximum size of the description string is 13 lines of 20 characters each. NOTE:donotusethe"Comma” character (,). 144V739E4.00 · Vcolor 739 M/L | 43 | 12/2022...
Changingtherecipevaluesonlyaffectsthecycleinprogress.Oncethecycleiscomplete,thechangesmadearerestoredtothe factoryvalues.Ifthevalueenteredisoutsidethepermittedrange(shownonthedisplay),thefollowingmessageappears: MIXER SPEED MIXER SPEED 07:31 - 25/11/2019 MIXER SPEED NEW VALUE VALUE IS NOT WITHIN THE LIMITS MIN 40 / MAX 240 Fig. 38. Value outside the range entered 144V739E4.00 · Vcolor 739 M/L | 44 | 12/2022...
PAUSE SPEED MIXER SPEED 120RPM PAUSE TIME MIXER ON TIME 20sec MIXER OFF TIME 10sec MIXER ON TIME 20sec MIXER OFF TIME 10sec ADVANCED CONFIGURATIONS Fig. 39. Recipe program advanced configurations 144V739E4.00 · Vcolor 739 M/L | 45 | 12/2022...
60RPM NEW VALUE PAUSE STORAGE PAUSE SPEED MIXER SPEED 120RPM PAUSE TIME MIXER ON TIME 20sec MIN 40 / MAX 240 MIXER OFF TIME 10sec Fig. 41. Editing in real time 144V739E4.00 · Vcolor 739 M/L | 46 | 12/2022...
Tapping inside the area on the left shows the 6 data samples on the left-hand side; tapping inside the area on the right shows the second group of six data samples. Thegraphisbasedonsamplesthataretakenwhileacycleisbeingcarriedout,thereforethegraphcanonlybecreatedifat least two samples are available. 144V739E4.00 · Vcolor 739 M/L | 47 | 12/2022...
Page 48
The sampling time is governed by parameter rE0. Thecoloursofthegraph,backgrounds,lines,etc.,aredefaultsettingsandcannotbechanged. Toreturntothepreviousscreen,waitforafewseconds. Legend of colours Colour Description Black Background Darkgrey Grid Light grey Setpoint Orange Tankprobetemperature Heaterprobetemperature Blue Condenser probe temperature Yellow Density 144V739E4.00 · Vcolor 739 M/L | 48 | 12/2022...
Chapter content This chapter contains the following information: Subject Page Standard operation Operation with special maintenance Operation with mixture density control Special cycles Independent safety temperature for each recipe Power failure management 144V739E4.00 · Vcolor 739 M/L | 49 | 12/2022...
OFF time period (t04),atspeedt06. When the compressorisreactivated,thearmresumesitsrotationcontinuouslyfortheentireactivationtime.Thephaseendswhenthe program start date and time selected at the Start is reached. The program can always be ended at any time by pressing Ifspecified,theamountofproductinthemachinecanbeselectedbytappingFullload/Halfload.Duringtheconservationdueto delayedstartphase,theHACCPdataisstoredintheHACCPlogandcanbedownloadedviatheUSBportonthebackoftheuser interface. 144V739E4.00 · Vcolor 739 M/L | 50 | 12/2022...
Density = (E10 x AbsorbedCurrent + E11 x AbsorbedCurrent + E12) The values to enter for the 3 coefficients vary depending on the power cut of the connected EVCO inverter and based on the size ofthemachinetank. 144V739E4.00 · Vcolor 739 M/L...
7.4 SPECIAL CYCLES Vcolor 739 offers 3 special cycles: • Cooling cycle; • Cleaning cycle; • Continuous mixing cycle (only with EVCO inverter connected). 7.4.1 Cooling cycle Oncethecoolingcyclehasbeenselected,Vcolor 739willaskyoutoselectthecoolingsetpoint(defaultt13 shown). to launch the cycle with the selected setpoint. Whileitisrunning,thefollowingcanbechanged: • The temperature setpoint;...
8.7 DEFROST SOLENOID VALVE Thiscanonlybeactivatedifenabledfortherecipeinprogress,duringthecoolingphase. Thefirstkeytapactivatestheoutput,theseconddeactivatesit.Ifitisnotdeactivatedviakey,whenthetimegivenind3elapses, it is nevertheless deactivated. Ifthecoverisopened,itisstillactivatedforthetimeperiodd3 or until the cover is closed. During defrost solenoid valve activation the compressor and the cooling solenoid valve are switched on. Attheendofthesolenoidvalveactivationtime,thecompressorandthecoolingsolenoidvalvereverttonormalregulation. Atthestartofanextractionphase,ifthetemperatureofthetankislowerthand2,adefrostbeginsautomatically. 144V739E4.00 · Vcolor 739 M/L | 55 | 12/2022...
8.9 SINGLE SPEED ARM ROTATION This output is used when the machine is in single speed configuration without using the Inverter. It is activated when the mixer needs to be activated. 144V739E4.00 · Vcolor 739 M/L | 56 | 12/2022...
9. PARAMETERS Chapter content This chapter contains the following information: Subject Page Description of columns in the Table of Parameters Table of configuration parameters for Vcolor 739 Table of Inverter configuration parameters 144V739E4.00 · Vcolor 739 M/L | 57 | 12/2022...
Page 60
Enable mixer direction control 0 = Disabled; 1 = Enabled. E14 Maintenance interval. 200...800 Only applies if P68≠0 Only applies if P68≠0andE13 = 1. NOTE: changing the parameters causes the controller to restart. 144V739E4.00 · Vcolor 739 M/L | 60 | 12/2022...
The minimum and maximum limits are calculated on the basis of the number of pole pairs for the motor, i.e. between 5 and 100 Hz; Looking at the motor with the shaft positioned to the front; Parameter depends on the motor rating label; In alarm or emergency conditions, stoppage is always the free type. 144V739E4.00 · Vcolor 739 M/L | 61 | 12/2022...
• Alarmshownondisplay Checkforandremovethecause Compressor high pressure compressor • Recording in alarm log of the alarm on the digital input digital input open (i21) alarm • Cycle inhibited if in cooling (automatic reset) 144V739E4.00 · Vcolor 739 M/L | 63 | 12/2022...
Inverter • Restore communication between No communication between • Recording in alarm log communication base board and inverter base board and inverter • MODBUScommunicationinterrupted alarm • Automaticreset • Load regulation inhibited 144V739E4.00 · Vcolor 739 M/L | 64 | 12/2022...
Page 65
This page has been left blank on purpose. 144V739E4.00 · Vcolor 739 M/L | 65 | 12/2022...
Page 66
Each user or integration specialist should conduct their own complete and appropriate risk analysis, in addition to carrying out a product evaluation andtestinrelationtoitsspecificapplicationoruse. Neither EVCO nor any of its associates or subsidiaries shall be held responsible or liable for improper use of the information contained herein. MADE IN ITALY EVCO S.p.A.
Need help?
Do you have a question about the Vcolor 739 M and is the answer not in the manual?
Questions and answers