Section 13: Retractor Rods; Spring Removal System Board - Emerson Hytork XL Series Installation, Operation And Maintenance Manual

Installation, Operation and Maintenance Manual
MAC050515 EN Rev. 0
Section 13:
13.1

Spring Removal System Board

Hytork's "SPRING REMOVAL SYSTEM BOARD" contains a full set of retractor rods so that
any size of actuator can be disassembled on site.
Standard spare parts kits for XL26 to XL221 contain the required retractor rods. For XL281
to XL4581, seperate retractor rod kits are available. These rods are not included in the
spare parts kits but are seperately available.
Ask your local Hytork representative or Stocking Distributor of Hytork products for details.
!
•
•
•
Retractor Rods
Retractor Rods
WARNING
The Hytork retractor rod tools are specially designed for the safe removal of
the Spring-Return end cap modules. Only Hytork manufactured or approved rods
are to be used for spring end cap removal.
As with any threaded tool that is used frequently, retractor rods should
be checked to ensure that the threads are not worn or damaged in any way
and greased regularly. Any damaged or worn rods must not be used and must
be destroyed.
Retractor rods must be made to the design specification for safety reasons.
Emerson cannot take any responsibility for any other design.

Section 13: Retractor Rods

November 2022
27