Section 12: Testing The Hytork Actuator; Testing The Hytork Actuator - Emerson Hytork XL Series Installation, Operation And Maintenance Manual

Section 12: Testing the Hytork Actuator

November 2022
Section 12:
Using compressed air at 80 psi to 100 psi (5.5 bar to 7 bar) check the seal areas with soapy
water, ensuring there are no leaks and that the pinion rotates smoothly over its full travel.
26

Testing the Hytork Actuator

Installation, Operation and Maintenance Manual
MAC050515 EN Rev. 0
Testing the Hytork Actuator