Advertisement
Quick Links
H-6304MAH
2 DRAWER OFFICE
LATERAL FILE CABINET
TOOL NEEDED
Phillips Screwdriver
A
Adjustable Glide x 4
NOTE: Assemble on a smooth, non-marring
surface to avoid scratching.
NOTE: Check that all parts are included.
1.
Lock drawers. With second person, set file cabinet
on side.
2. Insert adjustable glides (A) on bottom of file cabinet.
Glides can be adjusted to compensate for uneven
floors. (See Figure 1)
Figure 1
PAGE 1 OF 2
1-800-295-5510
uline.com
Two Person Assembly
Recommended
B
Metal Handle x 2
F
Screw x 6
M6 x 40 mm
Tighten
PARTS
C
File Clip x 8
G
Key (Set of 2) x 1
ASSEMBLY
3. With second person, set file cabinet upright. Unlock
drawers. Remove handle (B) mounted inside drawer
and use same screws to attach handle to front of
drawer. Repeat for second drawer. (See Figure 2)
Figure 2
A
D
Long Metal Bar x 2
E
Short Metal Bar x 4
Tighten
B
0921 IH-6304MAH
Advertisement
Related Manuals for U-Line H-6304MAH
Summary of Contents for U-Line H-6304MAH
- Page 1 H-6304MAH 1-800-295-5510 uline.com 2 DRAWER OFFICE LATERAL FILE CABINET TOOL NEEDED Two Person Assembly Recommended Phillips Screwdriver PARTS Adjustable Glide x 4 Metal Handle x 2 File Clip x 8 Long Metal Bar x 2 Short Metal Bar x 4...
- Page 2 ASSEMBLY CONTINUED 4. To hang files from side to side, attach one bar 5. To hang files from front to back, attach two bar clip (C) to each side of drawer and insert one clips (C) to back of drawer and insert two short long metal bar (D).