Page 1
Para Español, vea páginas 4-6. Pour le français, consulter les pages 7-9. H-6991 1-800-295-5510 uline.com DELUXE VINYL WORK STOOL WITH ADJUSTABLE ARMS TOOL NEEDED Phillips Screwdriver PARTS Seat Cushion x 1 5-Star Base x 1 Glide x 5 Footring x 1...
Page 2
ASSEMBLY CONTINUED 3. Align armrest mounting bracket with holes on seat 5. Slide footring onto the gas lift and tighten knob to cushion and use four bolts with washers to attach. secure. (See Figure 5) Insert armrest into mounting bracket and use armrest Figure 5 knob to secure.
STOOL ADJUSTMENTS Seat Height Adjustment – To raise seat height, lift lever up with little to no weight on the seat. To lower seat height, lift lever up while sitting. 2. Back Height – To raise the back, lift the back cushion until it clicks into the desired height.
Page 4
H-6991 800-295-5510 uline.mx SILLA DE TRABAJO DE VINIL DE ALTA CALIDAD CON DESCANSABRAZOS AJUSTABLES HERRAMIENTA NECESARIA Desarmador de Cruz PARTES 1 Asiento 1 Base Estrella 5 Niveladores 1 Reposapiés 1 Pistón de Gas 1 Respaldo con Poste 2 Soportes para...
Page 5
CONTINUACIÓN DEL ENSAMBLE 3. Alinee el soporte de instalación del descansabrazos 5. Inserte el reposapiés en el pistón de gas y apriete la con los orificios del asiento y utilice cuatro pernos perilla para asegurarlo. (Vea Diagrama 5) con rondanas para fijarlo. Inserte el descansabrazos Diagrama 5 en el soporte de instalación y utilice la perilla del mismo para fijarlo.
Page 6
AJUSTES DE LA SILLA 1. Ajuste de la Altura del Asiento – Para subir la altura del asiento, levante la palanca sin o con poco peso en el asiento. Para bajar la altura del asiento, levante la palanca mientras está sentado. 2.
Page 7
H-6991 1-800-295-5510 uline.ca TABOURET DE TRAVAIL DE LUXE EN VINYLE AVEC ACCOUDOIRS AJUSTABLES OUTIL REQUIS Tournevis cruciforme PIÈCES Siège x 1 Base à 5 branches x 1 Patin x 5 Repose-pied x 1 Vérin pneumatique x 1 Dossier avec montant x 1...
Page 8
ASSEMBLAGE SUITE 3. Alignez le support de fixation pour accoudoir sur les 5. Faites glisser le repose-pied sur le vérin trous du siège et utilisez quatre boulons avec des pneumatique et serrez la molette pour le fixer. rondelles pour le fixer. Insérez un accoudoir dans le (Voir Figure 5) support de fixation et utilisez la molette d'accoudoir Figure 5...
Page 9
RÉGLAGES DU TABOURET Réglage de la hauteur du siège – Pour élever le siège, soulevez le levier avec peu ou sans poids sur le siège. Pour abaisser le siège, soulevez le levier en position assise. 2. Hauteur du dossier – Pour élever le dossier, soulevez- le jusqu'à...