Advertisement
Available languages
Available languages
Quick Links
H-6278, H-6279
H-6280
MOBILE TRAINING
TABLE
TOOLS NEEDED
Allen Wrench
Open-End Wrench
(included)
(included)
Bracket x 2
NOTE: Assemble on a smooth, non-marring
surface to avoid scratching.
NOTE: Do not fully tighten bolts and screws until
assembly is complete.
IMPORTANT! Check that all parts are included.
1.
Insert legs into socket on table frame. Threaded hole
side must be pointed inward. (See Figure 1)
Figure 1
Lever
PAGE 1 OF 6
1-800-295-5510
uline.com
Phillips
Screwdriver
Table Frame x 1
Knob x 4
Bolt x 4
Leg
Modesty
Panel
Drill
(optional)
PARTS
Tabletop Panel x 1
Washer x 4
ASSEMBLY
2. Use two bolts to secure leg. Repeat for remaining leg.
(See Figure 2)
Figure 2
3. Place tabletop panel upside down. With second
person, align table frame with holes in tabletop panel.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Two Person Assembly
Recommended
Leg x 2
5/8" Screw x 10
1⁄" Screw x 8
Bolt
1223 IH-6278
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for U-Line H-6280
Summary of Contents for U-Line H-6280
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-6278, H-6279 1-800-295-5510 H-6280 uline.com MOBILE TRAINING TABLE TOOLS NEEDED Two Person Assembly Allen Wrench Open-End Wrench Phillips Drill Recommended (included) (included) Screwdriver (optional) PARTS Tabletop Panel x 1...
- Page 2 ASSEMBLY CONTINUED 4. With second person holding assembled base in NOTE: Fully tighten bolts and screws. place, use two 5/8" screws to secure each corner of 6. With second person, set table upright. Adjust casters table frame. (See Figure 3) to compensate for uneven floors.
-
Page 3: Herramientas Necesarias
H-6278, H-6279 800-295-5510 H-6280 uline.mx MESA MÓVIL PARA CAPACITACIÓN HERRAMIENTAS NECESARIAS Se Recomienda Armar Llave Allen Llave de Boca Desarmador Taladro Entre Dos Personas (incluida) Abierta (incluida) de Cruz (opcional) PARTES 1 Panel de Cubierta 2 Patas 1 Armazón de Mesa... - Page 4 CONTINUACIÓN DEL ENSAMBLE 4. Con la otra persona sosteniendo la base NOTA: Apriete los pernos y tornillos por ensamblada en su lugar, utilice dos tornillos de 5/8" completo. para asegurar cada esquina del armazón de mesa. 6. Con la ayuda de la otra persona, enderece la (Vea Diagrama 3) mesa.
-
Page 5: Montage
H-6278, H-6279 1-800-295-5510 H-6280 uline.ca TABLE DE FORMATION MOBILE OUTILS REQUIS Montage à deux Clé Allen Clé à fourche Tournevis Perceuse personnes recommandé (inclus) (inclus) cruciforme (optionnel) PIÈCES Surface de table x 1 Pied x 2 Cadre de table x 1... - Page 6 MONTAGE SUITE 4. Avec l'aide d'une deuxième personne tenant la REMARQUE : Serrez fermement les vis et les base assemblée en place, utilisez deux vis de boulons. 5/8 po pour fixer chaque coin du cadre de la table. 6. Avec l'aide d'une deuxième personne, positionnez (Voir Figure 3) la table à...
Need help?
Do you have a question about the H-6280 and is the answer not in the manual?
Questions and answers