Table of Contents
Advertisement
Available languages
Available languages
H-1485, H-1486, H-1487
π
H-1783, H-6754
STANDARD LIFT TABLE
SPECIFICATIONS
Capacity
Height Raised
Height Lowered
Table Size
Total Height
Overall Length
Foot Pedal Cycles to Max Height
Wheel Diameter
Weight
Working Volume of Oil Cylinder
Oil Capacity
1.
Read all instructions carefully before operating the
lift table.
2. DO NOT overload the lift table and always operate
it within the rated load. Overloading will cause
damage to the lift table and the operator.
3. DO NOT stand or sit on the table to work.
4. DO NOT put hands or feet under the table when
lowering.
5. Apply the brakes while loading to prevent the table
from moving.
6. The load must be distributed uniformly across the
whole table.
7.
DO NOT load loose or unstable loads onto the table.
8. DO NOT leave the table loaded for extended
periods of time.
PAGE 1 OF 9
1-800-295-5510
uline.com
TECHNICAL INFORMATION
H-1485
H-1486
330 lbs.
660 lbs.
29"
35"
8.8"
11"
27 x 18 x 2"
32 x 20 x 2"
37"
39"
31"
37"
25
32
4"
5"
101 lbs.
165 lbs.
138 ml
164 ml
210 ml
250 ml
GENERAL INFORMATION
H-1487
1,100 lbs.
35"
11"
32 x 20 x 2"
39"
37"
45
5"
187 lbs.
164 ml
250 ml
9. DO NOT move the truck while lifting.
10. The table should only be used on flat solid surfaces.
11. Make sure not to overload the table when it is in
the raised position. The safety valve only works as
the table is lifted. Overloading in the raised position
may damage the table.
12. When loading and unloading goods in the raised
position, do not drag loads across the table.
This may cause offset loading and the table may
turn over.
13. When maintaining and repairing the table, the
stand bar should be used to support the fork arm in
order to prevent table from falling. There should not
be a load on table while maintaining and repairing
the table.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
H-1783
H-6754
1,760 lbs.
1,100 lbs.
39.5"
36"
16.5"
12.5"
39½ x 20 x 2"
63 x 31.5 x 2"
39"
39"
46"
65"
56
40
6"
5"
254 lbs.
296 lbs.
157 ml
200 ml
240 ml
300 ml
1118 IH-1485
Advertisement
Table of Contents
Related Manuals for U-Line H-1485
Summary of Contents for U-Line H-1485
- Page 1 Para Español, vea páginas 4-6. Pour le français, consulter les pages 7-9. H-1485, H-1486, H-1487 π 1-800-295-5510 H-1783, H-6754 uline.com STANDARD LIFT TABLE TECHNICAL INFORMATION SPECIFICATIONS H-1485 H-1486 H-1487 H-1783 H-6754 Capacity 330 lbs. 660 lbs. 1,100 lbs. 1,760 lbs.
- Page 2 ASSEMBLY FOOT LEVER INSTALLATION 1. These are folding tables. They can only be operated if the handle is in the upright position. Foot lever mounting: insert the foot pedal into the hole 2. The foot lever is dismantled when shipped. It must be of the square bar.
-
Page 3: Maintenance
MAINTENANCE It is very important to conduct necessary maintenance 5. If there is any failure, the lift table should be and upkeep so as to prolong the service life and repaired at once before it is put into use again. safety of the lift table. -
Page 4: Información Técnica
H-1485, H-1486, H-1487 π 01-800-295-5510 H-1783, H-6754 uline.mx MESA DE ELEVACIÓN ESTÁNDAR INFORMACIÓN TÉCNICA ESPECIFICACIONES H-1485 H-1486 H-1487 H-1783 H-6754 Capacidad 150 kg (330 lbs.) 300 kg (660 lbs.) 499 kg (1,100 lbs.) 798.3 kg (1,760 lbs.) 499 kg (1,100 lbs.) Altura Máxima... - Page 5 ENSAMBLE COLOCACIÓN DE LA PALANCA DE PIE Estas son mesas plegables. Solo pueden funcionar si el asa está en posición vertical. Montaje de la palanca de pie: inserte el pedal en el 2. La palanca de pie se desmonta para el envío. orificio ubicado en la barra cuadrada.
-
Page 6: Mantenimiento
MANTENIMIENTO Es muy importante realizar el mantenimiento necesario 5. En caso de fallos, la mesa de elevación debe para prolongar la vida útil y la seguridad de la mesa repararse de inmediato antes de volverse a utilizar. de elevación. Por favor, verifique la mesa de elevación 6. -
Page 7: Caractéristiques Techniques
H-1485, H-1486, H-1487 π 1-800-295-5510 H-1783, H-6754 uline.ca TABLE ÉLÉVATRICE STANDARD CARACTÉRISTIQUES TECHNIQUES SPÉCIFICATIONS H-1485 H-1486 H-1487 H-1783 H-6754 Capacité 149,7 kg (330 lb) 299,4 kg (660 lb) 499 kg (1 100 lb) 798,3 kg (1 760 lb) 499 kg (1 100 lb) Hauteur élevée... - Page 8 ASSEMBLAGE INSTALLATION DU LEVIER À PIED 1. Ces tables sont pliantes. Elles peuvent seulement être utilisées si la poignée est en position verticale. Assemblage du levier à pied : Insérez le levier à pied 2. Le levier à pied est démonté lors de la livraison. dans le trou de la barre carrée.
-
Page 9: Dépannage
ENTRETIEN Il est très important d'effectuer l'entretien nécessaire 5. En cas de défaillance, la table élévatrice doit être afin de prolonger la durée de vie et la sécurité de la réparée immédiatement avant d'être utilisée de nouveau. table élévatrice. Veuillez vérifier les points suivants avant 6.