My BERNINA
MULTI-DIRECTIONAL STITCHING
B 8 8 0 P LUS , 79 0 P LUS On ly
The B 880 PLUS and B 790 PLUS can sew Multi-directional stitches and stitch combinations in 360º. This allows
angled sewing without angling the fabric. Use Sideways Motion Foot #40C for all multi-directional sewing.
•
Select the stitch, then Information ("i"), then the multi-directional icon.
•
Rotate the selected stitch in 45º increments by touching one of the direct-selection nodes on the screen (indicated by the
yellow outlines in the graphics below).
•
Rotate in 0.5º increments by turning the stitch width knob.
•
Rotate in 1º increments by turning the stitch length knob.
•
The Stitch Altering Area indicates the sewing direction of the stitch and the Start (•) and Stop (+) points of the selected
stitch.
•
The Multi-directional function only appears in the "i" menu when the selected stitch can be sewn in multiple directions.
Keys to Successful Multi-Directional Stitching
•
Support fabric with stabilizer.
•
Attach Slide-on Table.
•
Draw parallel guidelines to aid in visually keeping the fabric straight.
•
Use fingertip guiding (lightly holding the fabric without inhibiting or helping it).
•
Attach Sideways Motion Foot #40C.
DIRECTIONAL SEWING-Single Mode, Single Direction
1.
Select Stitch #644. Select the "i" menu.
2.
Select the Multi-Directional Sewing icon; set the angle to 135º.
3.
When sewing this stitch, let the feed dog move the fabric
sideways to stitch the programmed pattern.
4.
Select Pattern End to finish.
B E R N I N A S E W I N G M A C H I N E W O R K B O O K
Do you know:
• How to guide the fabric for Sideways
Motion?
• Three ways to set the angle?
Stitch width
knob--0.5º
increments
Stitch length
knob--1º
increments
HOW
41