All-Over Directional Stitching - Bernina 880 PLUS Workbook

My BERNINA

ALL-OVER DIRECTIONAL STITCHING

Firm woven fabric, 6" x 6"
Heavyweight tear-away stabilizer 6" x 6"
80/12 Universal
Polyester or cotton embroidery thread
Default
Sideways Motion Foot #40C
Notes:
• Some adjustments may be necessary depending on the
fabric, thread, and stabilizer used to create the stitch
sample.
• This technique can also be created by importing sewing
machine stitches into Embroidery, which will be covered
in BERNINA Embroidery Machine Workbook.
(a)
B E R N I N A S E W I N G M A C H I N E W O R K B O O K
F OR B 8 8 0 PLUS AND B 79 0 PL US ONLY
This exercise features an all-over design created by selecting
one stitch (#656 is shown in the sample) and changing
directions as you sew. This all-over design is programmed
before stitching.
Di rectional Sewi ng-Programmed C ombi
1.
2.
(b)
3.
4.
5.
6.
7.
8.
9.
(See a and b)
Open Combi Mode; use 0-9 and input 656 and Check.
Select 0-9 to close. Add a second copy of 656.
Select 'i"; select pattern 1.
Select the Multi-directional icon and set the angle to
135º.
Select pattern 2. Select the Multi-directional icon; set angle to
225º.
Select the "i" breadcrumb.
Select All (Edit the Complete Combination icon).
Set Pattern Repeat to 2 and stitch. (Selecting Modify
Screen provides a preview of the stitch.) To fill the
fabric, omit Setting Pattern Repeat and stitch.
Select Modify Screen to exit.
Optional:
Create a 4-sided motif by selecting 315º
and 45º as the third and fourth sides.
Do you know how to:
• Change directions in 45º increments
when Multi-Directional stitching?
HOW
43