Supermicro X11DPG-HGX2 User Manual page 12

Super X11DPG-HGX2 User's Manual
Quick Reference Table
Jumper
JBT1
JPG1
JPME1
JPL1
JWD1
JVRM1/2
Connector
BT1
COM1
FAN1~3
HDD0, HDD1, HDD2
JLAN1(LAN1/LAN2)
JHDD3-5
JMB_E1~4
JMB_E5, JMB_E6
JPCIE1
JRK1
JSDCARD1
JTPM1
JUSB1 (USB0)
JUSBRJ45 (IPMI_LAN)
JUSBRJ45 (USB1/2)
JM2-1, JM2-2
JVGA
LED Description
DA6, DA11, DA13 HDD activity LEDs
DA4, DA10, DA12 HDD Fault LEDs
LED1 M.2 Active LED
LEDM1 BMC Heartbeat LED
Note: To avoid causing interference with other components, please be sure to use an
add-on card that is fully compliant with the PCI-standard on a PCI slot.
Description
CMOS Clear
VGA Enable
Manufacturing Mode Select
LAN1 port enable
Watch Dog Timer Enable
VRM I C (2-pins)
2
Description
Onboard CMOS battery
COM/serial port for front access
System cooling fan headers
SATA 3.0 onboard connectors supported by the Intel PCH
10GbE LAN Ethernet ports 1/2 on the I/O back panel
SATA 3.0 connection header supported by the Intel PCH
PCIe 3.0 x16 connectors supported by CPU
Power connectors
Supports two PCIe 3.0 x16 slots
Intel VROC RAID Key header for NVMe Solid State Device (SSD) use
SD card Slot
Port 80 connector for Trusted Platform Module (TPM)
Universal Serial Bus (USB) 3.0 port (USB Port 0)
Dedicated IPMI LAN port
Universal Serial Bus (USB) 3.0 ports on the I/O back panel
M.2 PCIe 3.0 x4 Slot (Supports M-Key 2280 and 22110) supported by Intel PCH
VGA port on the I/O back panel
12
Default Setting
Open (Normal) (See Chpt. 2)
Pins 1-2 (Enabled)
Pins 1-2 (Enable)
Pins 1-2 (Enabled)
Pins 1-2 (Reset to System)
Closed
Status
On: HDD active
On: An HDD Error occurs
On: M.2 active
Blinking Green: BMC normal