Memory Support And Installation - Supermicro X11DPG-HGX2 User Manual

Super X11DPG-HGX2 User's Manual

2.4 Memory Support and Installation

Warning! Exercise extreme care when installing or removing DIMM modules to prevent any
possible damage. Check the Supermicro website for recommended memory modules.
Memory Support
The X11DPG-HGX2 supports up to 6TB 3DS Load Reduced DIMM (3DS LRDIMM) Load
Reduced DIMM (LRDIMM), 3DS Registered DIMM (3DS RDIMM), Registered DIMM
(RDIMM), DDR4 (288-pin) ECC 2933*/2666/2400/2133 MHz memory modules in 24 slots
(*Note below). It also supports up to 9TB memory with DCPMM modules installed based
on the DCPMM population table on page 36. Populating these DIMM modules with a pair
of memory modules of the same type and size will result in interleaved memory, which will
improve memory performance.
Notes: 1. Support for 2933MHz memory is dependent on the CPU SKU. 2. 16Gb-based
memory modules are supported by 2nd Gen Intel Xeon Scalable-SP processors only
Memory Installation Sequence
Memory modules for this motherboards are populated using the "Fill First" method. The blue
memory slot of each channel is considered the "first DIMM module" of the channel, and the
black slot, the second module of the channel. When installing memory modules, be sure to
populate the blue memory slots first and then populate the black slots. To maximize memory
capacity, please populate all DIMM slots on the motherboard, including all blue slots and
black slots.
General Memory Population Requirements
1. Be sure to use the memory modules of the same type and speed on the motherboard
Mixing of memory modules of different types and speeds is not allowed.
2. Using unbalanced memory topology such as populating two DIMMs in one channel while
populating one DIMM in another channel on the same motherboard will result in reduced
memory performance.
3. Populating memory slots with a pair of DIMM modules of the same type and size will
result in interleaved memory, which will improve memory performance.
32