Supermicro X11DPG-HGX2 User Manual page 14

Super X11DPG-HGX2 User's Manual
Peripheral Devices
•
Two USB 3.0 ports on the rear I/O panel (USB 1/2)
•
One Type A USB 3.0 connector (USB 0)
•
One Micro SD card slot (for manufacture use only)
BIOS
•
32MB SPI AMI BIOS
®
•
ACPI 3.0/4.0, USB keyboard, Plug-and-Play (PnP), SPI dual/quad speed support, riser-card auto detection support, and
SMBIOS 2.7 or later
Power Management
•
Main switch override mechanism
•
Power-on mode for AC power recovery
•
Intel® Intelligent Power Node Manager 3.0 (available when the Supermicro Power Manager [SPM] is installed and a
special power supply is used.)
•
Management Engine (ME)
System Health Monitoring
•
Onboard voltage monitoring for +3.3V, 3.3V standby, +5V, +5V standby, +12V, CPU core, memory, chipset, BMC, and
PCH voltages
•
CPU System LED and control
•
CPU Thermal Trip support
•
Status monitor for on/off control
•
CPU Thermal Design Power (TDP) support of up to 205W (See Note 1 on the next page.)
Fan Control
•
Fan status monitoring via IPMI connections
•
Dual cooling zone
•
Multi-fan speed control support via onboard BMC
•
Pulse Width Modulation (PWM) fan control
System Management
•
Trusted Platform Module (TPM) support
•
PECI (Platform Environment Control Interface) 2.0 support
•
System resource alert via SuperDoctor® 5
•
SuperDoctor® 5, Watch Dog, NMI
LED Indicators
•
BMC Heartbeat LED
•
HDD activity LED
•
HDD Fault LED Indicators
•
M.2 Power LED
•
LAN Activity
Dimensions
•
21.94" (L) x 16.85" (W) (55.73cm x 42.8cm)
Motherboard Features
SM Flash UEFI BIOS
14