Supermicro X11DPG-HGX2 User Manual page 90

Super X11DPG-HGX2 User's Manual
VMD port 3A
Select Enable to use the Intel Volume Management Device Technology for this specific
root port. The options are Disable and Enable.
VMD port 3B
Select Enable to use the Intel Volume Management Device Technology for this specific
root port. The options are Disable and Enable.
Hot Plug Capable
Select Enable to enable Hot Plug support for the root ports specified by the user, which
will allow the user to change the devices on those root ports without shutting down the
system. The options are Disable and Enable.
IIO-PCIE Express Global Options
IIO-PCIE Express Global Options
The section allows the user to configure the following PCIeglobal options:
PCIe Hot Plug
Select Enable to support Hot-plugging for the selected PCIe slots which will allow the user
to replace the devices installed in the slots without shutting down the system. The options
are Disable, Enable, Auto and Manual.
PCIe Completion Timeout (Global) Disable
Use this feature to select the PCIe Completion Time-out settings. The options are Yes, No,
and Per-Port.
South Bridge
The following South Bridge information will display:
•
USB Module Version
•
USB Devices
Legacy USB Support
Select Enabled to support onboard legacy USB devices. Select Auto to disable legacy support
if there are no legacy USB devices present. Select Disable to have all USB devices available
for EFI applications only. The options are Enabled, Disabled and Auto.
XHCI Hand-Off
This is a work-around solution for operating systems that do not support XHCI (Extensible
Host Controller Interface) hand-off. The XHCI ownership change should be claimed by the
XHCI driver. The options are Disabled and Enabled.
90