User/Group; Network - Direct IP IDIS DC-D4517RXP Operation Manual

Part 1 - Remote Setup

User/Group

• User/Group: Change remote camera control
permission settings for users and user groups.
- Add Group: Add a new user group. Designate
a name for the group and then specify control
authorities.
- Add User: Add a new user. Designate a name for
the user, select which group to add the user to, and
then enter a connection password.
- Edit: Edit group authorities and/or user passwords.
Select a group or user and then click on the button.
- Remove: Delete groups or users. Select a group
of user you wish to delete and then click on the
button.
• User/Group settings can only be configured by
users belonging to the Administrator group.
• There is no default password for the Administrator
group's admin user.
• Standard groups (Administrator, Operator, and
User) cannot be edited or deleted. Authorities
assigned here apply identically to ONVIF protocol
user groups.
• Group authorities that can be assigned are as
follows:
– Upgrade: Upgrade the system.
– Setup: Configure the system's settings.
– Color Control: Adjust the camera's brightness,
contrast, saturation, and hue settings.
10

Network

Change the network settings, enable FEN and security
features, and control network bandwidth use.