DFI KSM-KH Series Installation Manual page 2

Panel
Bottom View
Power Button
Top View
DC-in
Front OSD Functions (only for models with front OSD)
Backlight or Power
on/off
Notes on OSD Settings:
The front OSD is capable of controlling the system in the following ways in addition to
its explicit functions.
1. System Power On/Off: Press the Backlight on/off button for 3 seconds.
2. Light Sensor On/Off: Press the Brightness up arrow for 3 seconds.
3. OSD Lock/Unlock: Press the Brightness down arrow for 3 seconds.
4. The Alarm LED has no funtion for the KSM-KH Series.
(1)
Status LED (Orange)
HDD LED (Red)
COM 2
COM 3
Reset Button
USB 2.0
DVI-D
(DVI-I connector)
HDMI (KSM-190)
VGA
Volume Brightness
2
COM 1
COM 4
Extended Power
on/off Switch
USB 3.0
LAN 1
LAN 2
Power HDD Alarm LED