HIKVISION DS-KV6113-PE1 User Manual page 29

device supports IPv4.
Steps
1. Click Network → Basic Settings → TCP/IP to enter the settings page.
2. Configure the network parameters.
– Check DHCP, the device will get the parameters automatically.
– Set the IPv4 Address, IPv4 Subnet Mask and IPv4 Default Gateway manually.
3. Configure the corresponding DNS server parameters.
4. Click Save to enable the settings.
Port Settings
Steps
1. Click Network → Basic Settings → Port to enter the settings page.
Video Intercom Villa Door Station User Manual
Figure 5-4 TCP/IP Settings
19