HIKVISION DS-KV6113-PE1 User Manual page 30

2. Set the ports of the device.
HTTP Port
The default port number is 80, and it can be changed to any port No. which is not occupied.
HTTPS Port
The default port number is 443, and it can be changed to any port No. which is not occupied.
RTSP Port
The default port number is 554.
Server Port
The default server port number is 8000, and it can be changed to any port No. ranges from
2000 to 65535.
3. Click Save to enable the settings.
Wi-Fi Settings
Steps
1. Go to Network → Basic Settings → Wi-Fi to enter the settings page.
2. Enable Wi-Fi.
3. Click Add, and set corresponding parameters. and Password of the Wi-Fi.
1) Enter the SSID.
2) Select Working Mode.
3) Select Encryption Type.
4) Click OK.
5) Optional: Click Refresh to get the present information.
4. Click Network Settings, and set corresponding parameters.
5. Select Security Mode.
6. Click Connect.
Video Intercom Villa Door Station User Manual
Figure 5-5 Port Settings
20