Specifications - Ubiquiti PBE-M5-300-US Quick Start Manual

Table of Contents

Advertisement

Select your antenna from the list. If Calculate EIRP Limit is enabled, transmit output
power is automatically adjusted to comply with the regulations of the applicable
country. Note the requirements and antenna types listed below.
Cable Loss (When applicable)
Enter the cable loss in dB. Output power is adjusted to compensate for loss
between the radio and the antenna.
Certified Antenna Types
This radio transmitter FCC ID: SWX-PBE5M / IC: 6545A-PBE5M has been approved
by FCC / ISED Canada to operate with the antenna types listed below with the
maximum permissible gain for each antenna type indicated. Antenna types not
included in this list or having a gain greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device.
Antenna
Dish
Specifications
Dimensions
Weight (Mount Included)
Gain
Networking Interface
Enclosure
Max. Power Consumption
Max. TX Power
Power Supply
Power Method
Wind Survivability
Wind Loading
Mounting
Salt Fog Test
Vibration Test
PBE-M5-300 Quick Start Guide
PBE-M5-300
Frequency
5 GHz
325 x 325 x 256 mm
(1) 10/100 Ethernet Port
Outdoor UV Stabilized Plastic
24V, 0.5A PoE Adapter (Included)
Passive PoE (Pairs 4, 5+; 7, 8 Return)
200.2 N @ 200 km/h
Pole Mounting Kit Included
IEC 68-2-11 (ASTM B117),
Equivalent: MIL-STD-810 G Method 509.5
Gain
22 dBi
(12.8 x 12.8 x 10.1")
1.203 kg
(2.65 lb)
22 dBi
6W
26 dBm
200 km/h
(125 mph)
(45 lbf @ 125 mph)
IEC 68-2-6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pbe-m5-300

Table of Contents