Table of Contents
Advertisement
Temperature Shock Test
UV Test
Wind-Driven Rain Test
Operating Temperature
Operating Humidity
Certifications
Worldwide
US/CA
Safety Notices
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING:
WARNING:
risk of electric shock from lightning.
Electrical Safety Information
1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer's label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire hazard if
the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be provided
only by a qualified service technician.
3. This equipment is provided with a detachable power cord which has an integral safety
ground wire intended for connection to a grounded safety outlet.
a. Do not substitute the power cord with one that is not the provided approved type. Never
use an adapter plug to connect to a 2-wire outlet as this will defeat the continuity of the
grounding wire.
b. The equipment requires the use of the ground wire as a part of the safety certification,
modification or misuse can provide a shock hazard that can result in serious injury or
death.
PBE-M5-300
PBE-M5-300 Quick Start Guide
Operating Frequency (MHz)
U-NII-1
U-NII-2A
U-NII-2C
U-NII-3
Do not use this product in location that can be submerged by water.
Avoid using this product during an electrical storm. There may be a remote
IEC 68-2-5 at 40° C (104° F)
Equivalent: ETS 300 019-1-4
Equivalent: MIL-STD-810 G Method 506.5
-40 to 70° C (-40 to 158° F)
5 to 95% Noncondensing
IEC 68-2-14
ETS 300 019-1-4
CE, FCC, IC
5150 - 5875
5150 - 5250
5250 - 5350
5470 - 5725
5725 - 5850
Advertisement
Table of Contents
