2: Supported Loads - FIBARO FGS-2 3 Series Operating Manual

#2: Supported loads

The Switch 2 may operate under the following loads:
• Conventional incandescent light sources,
• Halogen light sources,
• Electrical appliances which power consumption does not exceed
the limit for a specified device.
Applied load and the Switch 2 itself may be damaged if
!
the applied load is inconsistent with the technical specifi-
cations!
When connecting the Switch 2 act in accordance with the following
rules:
• Do not connect loads greater than those recommended!
• Do not connect types of load other than resistive!
Rated load current table:
Device
Single Switch 2
(FGS-213)
Double Switch 2
(FGS-223)
All manuals and user guides at all-guides.com
Load IEC standards
8A
6.5A per channel
10A overall
UL standards
6.5A
6A per channel
9.5A overall
5
i
NOTE
IEC certification ap-
plies in Eu countries
and most countries
using 220-240V~. ul
certification applies
in united States and
most countries using
100-120V~.
SuPPORTED lOADS