Magnescale SmartSCALE SQ57 Instruction Manual page 43

Accessories (optional) SZ29
Th is is a spacer for verifying the clearance of SQ57. It is used for verifying the clearance between the scale
and the reading (detection) surface of the sensor head.
SZ29
8. Aft er installing the sensor head, apply a thread-locking agent to the threaded areas and install the
scale cover.
<When using the stop surfaces>
<When using parallel pins>
SQ57-Z Series, CH22 Series
Spacer for adjusting the clearancee
t
t
0.05 mm
0.1 mm
0.2 mm
M4 × 6
(2.7 N m)
M4 × 6
(0.75 N m)
Parallel pin
Scale
Fig. 3-10
Scale cover
Thread-locking
agent
Thread-locking agent
Scale cover
Thread-locking
agent
M4 × 6
Thread-locking agent
(2.7 N m)
M4 × 6
(0.75 N m)
Scale cover
11
(E)