Magnescale SmartSCALE SQ57 Instruction Manual page 40

2. Check and adjust the height and parallelism of the sensor head bracket.
Make sure that the sensor head and the scale of the sensor head bracket do not interfere.
<When using the stop surfaces>
Sensor head
bracket
Scale bracket
3. Bring the scale into contact with the stop surfaces, apply a thread-locking agent to the threaded areas,
and install.
<When using the stop surfaces>
Scale bracket
M6 × 12
(9 N m)
Scale
8
(E)
0.05 MG
77
± 0.5
Sensor head
bracket
Fig. 3-4
Thread-locking agent
Fig. 3-5
<When using parallel pins>
0.05 MG
Sensor head
bracket
77
± 0.5
Scale bracket
<When using parallel pins>
Parallel pin
Scale bracket
Thread-locking agent
M6 × 12
Scale
Sensor head
bracket
Unit: mm
SQ57-Z Series, CH22 Series