Table of Contents
Advertisement
information shown after the power-up action. Please refer to Section 2.1 for more details.
Enter the system information display menu:
MAIN MENUS > SYS INFO
Information on this menu cannot be edited.
The temperature refers to the internal temperature of the speed dome.
3.2.2 Configuring System Parameters
Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc.
on the system information settings menu.
MAIN MENUS > SYS SETTINGS > SYSTEM INFO SETTING
SYS INFO SETTING
SOFT ADDRESS
SOFT ADDR ACT
SOFT BAUD
SOFT BAUD ACT
BROADCAST ADDR
PELCO CHECKSUM
SYS TIME
BACK
You can click the left and right direction buttons in the PTZ control panel via the web browser of
the encoder to enter the next page and return to the previous page of the submenu if more
than one page is available.
HD-TVI Speed Dome User Manual
Figure 3-3 System Information
1
ZERO ANGLE
OFF
<DISPLAY SETTINGS>
2400
HEAT CONTROL
OFF
FAN CONTROL
ON
EIS FUNCTION
ON
EIS LEVEL
PRESET FOCUS
EXIT
Figure 3-4 System Information Settings
SYS INFO SETTING
TEMP
TEMP
OFF
N/A
OFF
BACK
EXIT
9
Advertisement
Table of Contents
