Configuring System Parameters - HIKVISION DS-2AE5223TI-A User Manual

User Manual of HD-TVI Speed Dome
MAIN MENUS > SYSTEM INFO
ADDRESS
COM FORMAT
PROTOCOL
VERSION
HARDVERSION
BUILD DATE
 Information on this menu cannot be edited.
 The temperature refers to the internal temperature of the speed dome.

3.2.2 Configuring System Parameters

Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc.
on the system information settings menu.
MAIN MENUS > DOME SETTINGS > SYSTEM SETTINGS
SYSTEM SETTINGS
SOFT ADDRESS
SET SOFT ADDR
SOFT BAUDRATE
SET SOFT BAUD
BROADCAST ADDR
PELCO CHECKSUM
SYSTEM TIME
BACK
You can click the left and right direction buttons in the PTZ control panel via the web browser of
the encoder to enter the next page and return to the previous page of the submenu if more
than one page is available.
 Dome address settings
To Set the Soft Address of the Speed Dome
If the SET SOFT ADDR is set as ON, the soft address is the valid address for connecting the speed
© Hikvision
SYS INFO
XX-XXXXX-X
2400,8,1
SELF ADAPTIVE
13 04 01
BACK EXIT
Figure 3-3 System Information
1 ANGLE ZERO
OFF <DISPLAY SETTINGS>
2400 HEAT CONTROL
OFF FAN CONTROL
ON EIS SETTINGS
ON EIS LEVEL
PRESET FOCUS
EXIT
Figure 3-4 System Information Settings
CAM VERSION
PARAM DATE
0
TEMPERATURE
1.00
1.00
BACK
SYSTEM SETTINGS
TEMP
TEMP
OFF
N/A
OFF
BACK EXIT
SYS INFO
X.XX
X XX XX
38
EXIT
SYSTEM SETTINGS
PROTOCOL STATUS
PROTOCOL AUTO MATCH
485 CHECK
MEMORY TIME
COAXIAL CONTROL
PROTOCOL-C
BACK EXIT
9
OFF
AUTO
180S
ON
AUTO