Configuring Patterns - HIKVISION DS-2AE4215T-D User Manual

3.4.4 Configuring Patterns

Purpose:
A pattern is a memorized, repeatable series of pan, tilt, zoom and preset movements that can be
recalled by a command or automatically performed by a configured function (alarm, park, time task,
and power-up).
Steps:
1. Move the cursor to enter the PATTERNS submenu:
MAIN MENUS > SYS SETTINGS > PATTERNS
2. Choose the pattern number.
(1) Move the cursor to PATTERN NO. and click IRIS+ to enter the editing mode.
(2) Click the up/down direction buttons to select the number of the pattern which is to be
configured.
(3) Click IRIS+ again to confirm the settings.
3. Edit the pattern.
(1) Move the cursor to EDIT PATTERN and click IRIS+ to enter editing mode.
(2) Click the PTZ control buttons and direction buttons to operate the speed dome to draw a
movement path, including pan scan, tilt scan, zoom in, zoom out, etc. The speed dome can
automatically memorize the path you operated as a pattern.
(3) Click IRIS+ again to save the pattern and exit editing mode.
HD-TVI Speed Dome User Manual
Figure 3-15 Pattern Configuration Menu
Figure 3-16 Edit the Pattern
26