Configuring Timing Tasks - HIKVISION DS-2AE4215T-D User Manual

 REMAIN MEMORY indicates the remaining memory of the speed dome for configuring the
patterns. When it reaches 0, no more patterns can be configured. You can also see the
remaining memory shown under PATTERNS menu as REMAINING.
 The pan/tilt movements and the lens operations cannot be memorized simultaneously.
4. Preview the pattern.
Enter the PREVIEW menu to preview the current pattern.
5. Call the defined pattern.
You can call the special presets to call the defined pattern. E.g. call preset 41 to call pattern 1.
Please refer to Section 2.2 to find the corresponding preset number for each pattern.
6. Delete the patterns.
Delete a chosen pattern. Click IRIS+ to enter RECORD PATTERN and you can see DEL PATH
ABOVE. Click IRIS+ to delete the pattern.
If you delete the current pattern, the following pattern will also be deleted. E.g., if pattern
2 is deleted, pattern 3 and pattern 4 will be deleted as well.
7. Clear all the patterns.
Enter CLEAR menu and click IRIS+ to delete all the defined patterns.

3.4.5 Configuring Timing Tasks

Purpose:
A timing task is a preconfigured action that can be performed automatically at a specific date and
time.
Steps:
1. Move the cursor to enter the TIME TASK submenu:
MAIN MENUS > SYS SETTINGS > TIME TASK
2. Choose the task number.
Steps:
(1) Move the cursor to TASK NO. and click IRIS+ to enter the editing mode.
HD-TVI Speed Dome User Manual
Figure 3-17 Time Task Configuration Menu
27