Configuring System Parameters - HIKVISION DS-2AE7225TI-A User Manual

model, address, protocol, etc. The information shown on this submenu is similar to the system
information shown after the power-up action. Please refer to Section 2.1 for more details.
Enter the system information display menu:
MAIN MENUS > SYSTEM INFO
 Information on this menu cannot be edited.
 The temperature refers to the internal temperature of the speed dome.

3.2.2 Configuring System Parameters

Purpose:
You can check and also edit the system information of software address, baud rate, system time, etc.
on the system information settings menu.
MAIN MENUS > DOME SETTINGS > SYSTEM INFO SETTINGS
SYSTEM INFO SETTINGS
SOFT ADDRESS
SOFT ADDR ACT
SOFT BAUD
SOFT BAUD ACT
BROADCAST ADDR
PELCO CHECKSUM
SYSTEM TIME
BACK EXIT
You can click the left and right direction buttons in the PTZ control panel via the web browser of
the encoder to enter the next page and return to the previous page of the submenu if more
than one page is available.
HD-TVI Speed Dome User Manual
Figure 3-3 System Information
1
OFF
2400
OFF
ON
ON
Figure 3-4 System Information Settings
SYS INFO
CAM VERSION
PARAM DATE
TEMPERATURE
TRACK
TRACKBUILDTIM
BACK EXIT
9
X.XX
X XX XX
38
X.XX
161130