Using Sensorcontrol Plus; Cleaning And Servicing; Cleaning Products - Bosch OptiMUM 8 MUM9 Series Information For Use

en Cleaning and servicing
11.2 Using SensorControl
Plus
You can find out here how to select
and start an automatic programme.
Requirements
¡ The bowl has been inserted.
¡ The bowl lid is fitted.
Insert the appropriate tool:
1.
Beating whisk for whipping
‒
cream and egg whites
Kneading hook for yeast dough
‒
Insert mains plug.
2.
a The display shows "OptiMUM".
Press ⁠ .
3.
a The display shows "CREAM".
Use , or
4.
quired programme, e.g. "EGG
WHITE".
a The scales will be calibrated.
a The display shows "- - - - -".
Wait for calibration to finish.
5.
a The display shows "0 g" or
"0.00 lb".
Add the relevant ingredient to the
6.
bowl, e.g. egg whites.
a The display shows the weight.
Note: On appliances without any
7.
scales, the display shows "ADD IN-
GREDIENTS" after selection of the
programme.
Add the measured ingredients to
the bowl.
Wait a short time after adding
8.
them.
a The display shows "HOLD
ROTARY SWITCH ON M/A 2s".
Press the release button and push
9.
the swivel arm down until it en-
gages.
Set the rotary switch to
10.
hold for at least 2 seconds.
Release the rotary switch.
11.
54
to select the re-
⁠ and
a The rotary switch stops at
a The display shows "SENSOR CON-
TROL PLUS" and the automatic
programme is running.
a When the preprogrammed result
has been achieved, the display
shows "FINISH".
a The rotary switch jumps to
processing ends.
Tip: If the result is not what you want,
you can continue processing cream
and egg whites to the consistency re-
quired using speed 7 or yeast dough
using speed 3.
12 Cleaning and servi-
cing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.
12.1 Cleaning products
Find out here which cleaning
products are suitable for your appli-
ance.
ATTENTION!
Using unsuitable cleaning agents or
incorrect cleaning may damage the
appliance.
▶
Do not use cleaning agents con-
taining alcohol or spirits.
▶
Do not use sharp, pointed or metal
objects.
▶
Do not use abrasive cloths or
cleaning agents.
▶
Only clean the control panel and
the display using a damp mi-
crofibre cloth.
⁠ .
and