Before Using For The First Time; Preparing The Appliance; Basic Operation; Cable Length - Bosch OptiMUM 8 MUM9 Series Information For Use

en first time
The appliance is switched on again
after a power failure. Processing can-
not start again until the rotary switch
has been set to
Overload protection
The overload protection system pre-
vents the motor and other compon-
ents from being damaged through
being overloaded.
The motor will switch off if
¡ too large a quantity is processed.
¡ processing is taking too long.
¡ a tool or accessory is blocked.
Swivel arm protection device
The swivel arm protection device pre-
vents the swivel arm from being
opened if an accessory is attached to
the rear drive.
6 Before using for the
f i r s t t i m e
first time
Prepare the appliance for use.
f i r s t t i m e
6.1 Preparing the appliance
Press the release button and raise
1.
the swivel arm until it engages.
→ "Opening swivel arm", Page 47
Turn the bowl clockwise and re-
2.
move.
→ "Removing bowl", Page 47
Clean all parts that come into con-
3.
tact with food before using for the
first time.
→ "Cleaning and servicing",
Page 54
Put the cleaned and dried parts
4.
out ready for use.
1
Depending on the appliance specifications
46
⁠ .
7 Basic operation
ope r a t i o n
ope r a t i o n
7.1 Cable length
Adjust the length of the power cable
to your needs.
Adjusting cable length via cable
storage compartment
Pull the power cable out to the re-
1.
quired length.
To shorten the cable, push it into
2.
the cable storage compartment.
Adjusting cable length via cable
1
rewinder
Pull the power cable out to the re-
1.
quired length and slowly let go.
To shorten the cable,
2.
pull the cable,
‒
allow the cable to wind up,
‒
pull the cable out again.
‒
Note: Do not push the cable in by
hand. If the cable jams, pull right out
and let it wind up again.
7.2 Swivel arm positions
You can find an overview of the posi-
tions of the swivel arm here.
Posi- Use
tion
Posi- Swivel arm is closed.
tion 1 ¡ Process ingredients with
tools.
¡ Use accessory on main
drive, e.g. Meat mincer.
¡ Use accessory on drive
2, e.g. Continuous feed
shredder
1