Table of Contents
Advertisement
13) Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
14) Press qw to select [OK], and press the <ENTER> button.
Note
f The PJLink password can also be changed in "[Set up password] page (when accessed by administrator account)" (x page 210) of the
web control screen.
[PJLink CONTROL]
Enable/disable the control function using PJLink protocol.
1)
Press as to select [PJLink].
2)
Press the <ENTER> button.
f The [PJLink] screen is displayed.
3)
Press as to select [PJLink CONTROL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
[PJLink NOTIFICATION]
Enable/disable the notification function of the PJLink.
1)
Press as to select [PJLink].
2)
Press the <ENTER> button.
f The [PJLink] screen is displayed.
3)
Press as to select [PJLink NOTIFICATION].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
f Proceed to Step 5) when [ON] is selected.
5)
Press as to select [NOTIFIED IP ADDRESS 1], [NOTIFIED IP ADDRESS 2], [NOTIFIED IP ADDRESS
1(IPv6)], or [NOTIFIED IP ADDRESS 2(IPv6)].
f Enter the IP address of the computer to be notified of the status of the projector.
[Art-Net]
Set the Art-Net function.
f To use the Art-Net function with the projector, it is necessary to set the password of the administrator account.
(x page 169)
Note
f When a password is not set for the administrator account (when blank), the network function of the projector cannot be used. When using
the web control function or the communication control via LAN (including operation by application software), set a password.
f The Art-Net function cannot be used using the "IPv6" protocol. Set the [NETWORK] menu → [WIRED LAN] → [IP VERSION] to either [IPv4]
or [IPv4 & IPv6] and assign the IP address for "IPv4".
174 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Select this item when controlling projectors with the PJLink protocol.
Select this item when not controlling projectors with the PJLink protocol.
Select this item when not using the notification function of the PJLink.
Select this item when using the notification function of the PJLink.
Advertisement
Table of Contents
