[Hdmi Cec] - Panasonic PT-MZ20K Operating Instructions Manual

[HDMI CEC]

Sets the CEC (Consumer Electronics Control) function of HDMI.
CEC is a function that is realized by exchanging device control signals with external devices connected with
an HDMI cable. Using the remote control of the projector, it is possible to operate the CEC-compatible external
device (hereinafter referred to as "CEC-compatible device") and to control the power on/off link status between
the projector and the CEC-compatible device.
For details on how to use the CEC function, refer to "Using HDMI-CEC function" (x page 229).
1) Press as to select [HDMI CEC].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Operating a CEC-compatible device
Operate the CEC-compatible device connected to the <HDMI IN 1> terminal or <HDMI IN 2> terminal.
[HDMI-CEC OPERATION] can be operated when HDMI1 input or HDMI2 input is selected. Switch to the input that
is corresponding to the CEC-compatible device you want to operate in advance.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [HDMI 1] or [HDMI 2].
f Select the input corresponding to the CEC-compatible device you want to operate.
f Proceed to Step 6) when the device to operate is displayed.
5) Press qw to switch the item.
f The devices will switch when multiple CEC-compatible devices are connected to one input.
f Select the device to operate.
6) Press as to select [HDMI-CEC OPERATION].
7) Press the <ENTER> button.
f The HDMI-CEC operation screen is displayed.
8) Select the item displayed on the HDMI-CEC operation screen to operate the device.
f Refer to the "Using HDMI-CEC function" (x page 229) for the operation details.
Note
f If no CEC-compatible device is connected to <HDMI IN 1> or <HDMI IN 2> terminal, there is no device displayed at [HDMI 1] or [HDMI 2]
and [----] is displayed.
f To exit the HDMI-CEC operation screen, press the <MENU> button.
Changing the menu code
The menu code that calls up the operation menu of the CEC-compatible device varies depending on the device
manufacturer. If you cannot call up the operation menu of a CEC-compatible device from the HDMI-CEC
operation screen, change the menu code setting.
1) Press as to select [HDMI CEC].
2) Press qw to select [ON].
3) Press the <ENTER> button.
f The [HDMI CEC] screen is displayed.
4) Press as to select [MENU CODE].
Chapter 4 Settings — [PROJECTOR SETUP] menu
Enables the CEC function.
Disables the CEC function.
ENGLISH - 151