CFF RAID adapter
Use the section to understand the power cable and signal input cable routing for CFF RAID adapters.
Cable routing for CFF RAID adapters
• For the locations of connectors on CFF RAID adapters and the processor board, see
assembly connectors" on page 21
• For more information about the CFF RAID adapters supported, see
and .
• The table below presents that how the power cables and MB input cables are connected with one and two
processors installed. Find more connections in different configuration at
signals (one processor)" on page 166
171.
Table 19. Cable routing for CFF RAID adapters
Figure 113. CFF RAID adapter cabling with two
processors installed
From
MB input
1
Power
2
for details.
and
"Cable routing for backplane signals (two processors)" on page
To
PCIe connector 4
1
Internal RAID power
2
connector
"Technical specifications" on page 3
"Cable routing for backplane
Figure 114. CFF RAID adapter cabling with one processor
installed
From
MB input
1
Power
2
Chapter 6
"System-board-
To
PCIe connector 7
1
Internal RAID power
2
connector
.
Internal cable routing
159