ohmex DUETTO PLUS Instruction Manual page 96

EN
PREPARATION OF THE APPLIANCE
b4 - Insert the auger (H) in the infeed duct (B) attaching
it to the motor pin.
b5 - Position the star blade (I) on the auger (H) with its
edge side facing outwards.
Positioning the star blade (I) with its sharp
edge towards the auger (H) will cause the
appliance to not function correctly.
The star blade (I) is very sharp.
It can cause injury!
b6 - Position the chosen grinding disk (L, M or N) in the
infeed duct (B) aligning the two protruding disk
ridges with their respective slots.
b7 - Tighten the ring nut (O) using your hands.
While tightening the nut (O) with the other
hand hold the infeed duct (B).
92
DUETTO PLUS
B
H
H
I
NO !!!
OK !
B
O