ohmex DUETTO PLUS Instruction Manual page 107

DUETTO PLUS
CLEANING AND MAINTENANCE
- Remove the perforated grille (C2) from the body
(C) by pressing on it and pulling it outwards at the
same time.
- In order to properly reposition the perforated grill
(C2) on the sieve body (C), push it down to make
sure that that open part of the grille is positioned
on the upper part of the body.
- To remove the disk easily, insert a flat screwdriver
between it and the infeed duct (B) for leverage.
- Make sure that the set screw (K) on the conical sieve
(C) is screwed in a way that will prevent losing it.
Handle the star blade with
particular attention. It is very
sharp. It can cause injury!
C
C2
C2
C
K
EN
C
C2
C
103