Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
the timer key to set the power on time.
Press the Up and Down keys to set the
power on time (0 ~ 24 H).
• The timer indicator light will light up
when this option is in use.
• At any time when the device is in
operation, press the timer key to remove
the timer function. Use the up and
down arrows to set the timer to 0. If you
want to set the shut-off time, press this
button while the device is in operation
and set the shut-off time.
SLEEP MODE
• In cold mode, press "SLEEP" on the
remote control; or press Timer and
the down button on the control panel
simultaneously;
• The speed in this case cannot be
adjusted manually. In this mode, the fan
will be forced to work at low voltage.
• The low speed indicator light will come
on.
• If you want to cancel, press the SLEEP
button on the remote control or the
Timer buttons and the down button on
the control panel again.
DISPLAY MODES
(See picture 08 on page 7)
30.
Air mode
31. Heat
32.
Temperature
33.
Swing
34.
Speed
35.
Dehumidifier
36.
Fan mode
37.
Cool mode
38.
Timer
39.
Time
PROTECTION FUNCTIONS
This device has numerous protection
systems:
• Protection against freezing: In cold or
dehumidifier function if the temperature
of the tube is very low, the appliance
will be automatically switched off as a
protection mechanism. When the tube
28
reaches the normal temperature, it will
start to work automatically.
• Protection against excess water: When
the water exceeds the expected level,
the device will emit an alarm sound
and the display will show the error
'FL'. At this point the water should be
emptied. Once emptied the appliance
will work automatically.
• Automatic defrost (cold mode and heat
mode): The appliance incorporates
this function automatically. When this
happens the display will show the heat
mode symbol.
• Automatic
thermal
protect the life of the appliance, it has
automatic thermal protection in heat
mode. In this case, the compressor and
the lower motor will stop.
• Compressor protection: This appliance
has a starting protection function
of 3 minutes after switching off the
compressor.
WIFI FUNCTION
To control the fan via WiFi just follow the
steps below (see picture 11 on pages 8 and
9):
• Download the "Smart Life" app from the
Play Store (Android) or App Store (iOS),
or scanning the QR code (see picture 11
(Q) on page 8).
• If you don't have an account, register or
log in via SMS verification.
• To connect the AC device to the mobile
device, press the "SPEED" button for
7 seconds to enter the WiFi-connect
mode.
• Open Smart Life app and tap "+" in the
upper right to add a new device through
the network.
• Ensure the device's indicator light
rapidly flashes (2 times per second).
• Select Wi-Fi network (note: network
must be 2.4Ghz band) and enter the
password (see picture 11 (R) on page 9).
• The device will commence the pairing
process and connect to the app (see
picture 11 (S) on page 9).
• After
successfully
protection:
To
configuring
the
Advertisement
Table of Contents
