Table of Contents
Advertisement
Available languages
Available languages
TABLAS / TABLES / TABELAS
PROBLEM
The air conditioner
is not working
Cooling efficiency
is not good
Too much noise
and
Vibrations
The machine is put
in walks and stops
frequently
Condensed
water
comes out when
the unit is moved
12
VERIFY
Is there electricity?
Is it switched on?
Does the fuse or switch
circuit breaker is off?
The "FL" light is on.
The ambient temperature is too low or too
high?
In dehumidification mode, the ambient
temperature is low.
Are the air inlet or air outlet?
Is there any other source of heat in the
room?
Are the air filters too dirty?
Is the fan speed situated low?
Are the air inlet or air outlet?
Is there any other source of heat in the
room?
The liquid inside
(refrigerator) is circulating
on the inside.
Is it level?
Does the voltage of the
Is feeding normal?
Is the output hose of
air properly set
or is it bent?
Have you placed the
output hose?
Is the base tank almost full?
ACTION
That's normal.
Push the plug into the
wall outlet. Change the fuse or
turn on the device.
Discharge the water condensed
from the base of water outlet.
Recommend
to
machine in at the temperature
of 7-35 ºC (44-95 ºF).
The machine is placed in
a
room
with
an
temperature of greater than 17
ºC (62 ºF).
Remove the object from
blockade.
Move the heat source.
Clean the air filter.
Set the speed of the
proper fan.
That's normal.
Place it on a floor
horizontal.
Keep the source of
power supply.
Try to keep the exit
of
horizontal
air
stretching it.
If you have placed the
hose, pull it out.
Discharge the condensed water
from the water outlet base.
use
the
ambient
without
Advertisement
Table of Contents
