An operating device used to control laerdal manikins and simulators and can be used with task trainers and standardized patients/with skillreporter (17 pages)
SimPad PLUS • Link Box PLUS Home Screen Overview Automatic Mode SimPad and Link Box, when used throughout this User Guide, applies to both SimPad PLUS and Link Box PLUS models, unless otherwise specified. Manual Mode QCPR Simulated Patient Monitor...
SimPad Overview Link Box Overview Front View Status LED On/Off Battery Connection Audio out Side Panel Connector Audio in Ethernet Auxiliary button Power LED WiFi LED On/Off Back View Battery Connection Manikin Cable Blood Pressure Tube Ethernet Audio out...
SimPad PLUS Overview Link Box PLUS Overview Front View Status LED On/Off Battery Connection Audio out Side Panel Connector Audio in Ethernet Auxiliary button Power LED WiFi LED On/Off Back View Battery Connection Manikin Cable Blood Pressure Tube Ethernet Audio out...
Starting and shutting down - On - steady green light. flashing green light. A steady green LED indicates the device is ready to use Error, needs service - steady red light. Low battery - flashing red light. Contact your local Laerdal representative.
Batteries charged - steady yellow light. flashing green Starting and shutting down - On - steady green light. flashing green light. A steady green LED indicates the device is ready to use Error, needs service - steady red light. Contact your local Laerdal representative.
SimPad Setup SimPad Setup Starting for the First Time Configuration Configuration can only be done when the simulator, manikin or task trainer is connected Follow the on-screen prompts to configure the device. to SimPad. Enter Link Box name (optional) Select language...
Page 8
SimPad Setup Starting for the First Time Configuration Follow the on-screen prompts to configure the device. Configuration can only be done when the simulator, manikin or task trainer is connected to SimPad PLUS. Enter Link Box name (optional) Select language...
SimPad Setup Link Box Setup Turn Off WiFi Connection Turn off by pressing On/Off button Connected to a network - steady green light SimPad SimPad PLUS Connected to a SimPad (or another instructor device) - steady blue light Tap to shutdown...
(or another instructor device) If no other Link Box is visible on the default SimLink network, the SimPad will automatically connect to the available one. This pairing is remembered and the units will reconnect when turned on again. When multiple Link Box/Simulator are available, choose the preferred option.
Home Screen Overview Automatic Mode Select Scenario Run pre-programmed Scenarios in Automatic Mode Scenarios Battery status, connection and clock Select from Scenario menu Run Scenarios Select a log in Manual Mode to facilitate debriefing with the Log Viewer Tap for detailed information on Scenario Register and Adjust display synchronize...
Page 12
Automatic Mode Automatic Mode Change Parameters Run Session Tap here to display Time since Scenario was started more patient state information Patient status Categories of interventions Access to vital signs adjustments Tap to log interventions Abnormal and events parameter values displayed here Last logged event Tap to add...
Automatic Mode Manual Mode End Session Select Theme Tap menu to End Session Open current Session log Folder of themes Tap to open Select theme for simulation Information about Session entered End Scenario here will be added to log Display more or less information Tap to start Session...
Page 14
Manual Mode Manual Mode Change Parameters Registering Interventions Current state Time since current state was activated States Patient vital signs Flag indicates start state Abnormal values Tap to register participant’s interventions Collapse mini-log Time since Scenario was started End Session White arrow indicates Register participant’s last activated state...
Page 15
Manual Mode Manual Mode Create New State for an Existing Theme Adjust Parameters Manually Tap to adjust values (e.g. respiration rate) Tap to access Circulation Menu For fine adjustments, hold finger over slider Drag to adjust parameters Select desired parameter Activate the new value Advanced Adjustments...
Page 16
Manual Mode Manual Mode Add New State to an Existing Theme Stopwatch 1. Tap to add new state to theme 2. Enter new state name Tap to display and activate the Stopwatch 4. Tap to save state to theme 3. Confirm New state is now ready Tap and hold to arrange states Tap x to delete...
Manual Mode QCPR View Log QCPR Feedback When CPR is performed on a CPR capable manikin, SimPad displays real time CPR feedback. Automatic Mode - Manual Mode - Tap to enlarge QCPR feedback Tap to enlarge QCPR feedback Go to Log Viewer...
Page 18
QCPR QCPR QCPR Log File QCPR Summary Debriefing mode provides an additional log file with data from CPR training. Tap to access log Indicates two main findings from the CPR performance...
Page 19
QCPR QCPR Compression Analysis Over Time Display Choices Toggle between displays With overall score Without overall score CPR settings can be adjusted to individual needs. Laerdal recommends using settings compliant with ILCOR guidelines.
When the Simulated Patient Monitor (optional item) is connected to SimPad, the instructor Ensure the Simulated Patient Monitor PC and the SimPad System are connected to the can toggle the display of vital signs. Navigate to manual mode and select Patient Monitor.
Connect SimPad to a different Link Box When Link Box is connected to a Patient Simulator with internal firmware it will be SimPad can only be connected to one Link Box at a time. SimPad will try to re-establish automatically updated, if necessary.
Connect SimPad PLUS to a different Link Box PLUS SimPad PLUS can be used with a standardized patient without connecting to the SimPad PLUS can only be connected to one simulator at a time. SimPad PLUS will try to Link Box PLUS.
Connect to a Network Connect to Wired Ethernet Network All models of SimPad and Link Box are connected via SimLink (ad hoc network) by default. Note It is possible to be on a wired network and a WiFi network simultaneously.
Bluetooth) Note Note Before moving Link Box PLUS to another WiFi network, ensure it is connected to SimPad PLUS Before moving Link Box to another WiFi network, ensure it is connected to SimPad with with a network cable. a network cable.
• Easy search, find, and pay navigation • Flexibility to purchase only what is required Register SimPad on SimStore SimPad needs to be connected to a network in order to register with SimStore online. See Network section. Select the desired...
SimStore Software Theme Editor SimPad can also be registered offline. A device key will be generated. Register the device from a PC. Theme Editor creates new themes with states and interventions for the SimPad System. Theme Editor can be downloaded from www.laerdal.com/themeeditor/...
Vocal Sounds Vocal sounds from the Patient Simulator such as crying, moaning etc. can be activated from the SimPad directly or via Themes and Scenarios. For more information about vocal sounds and to create user defined vocal sounds see Feature section.
Laerdal Li-Ion Battery - SimPad Laerdal Li-Ion Battery - SimPad PLUS Connect Two Laerdal Li-Ion Batteries Connect Two Laerdal Li-Ion Batteries Tap to view Device information Tap to view Device information Batteries are Batteries are discharged discharged in independently parallel...
Extra- Adult and Infant systoles Note Child The AC Adapter can only be used with SimPad or SimPad PLUS and Link Box or Link Box PLUS. Sinus 20 – 200 20 – 240 PVC RonT 20 – 200 20 – 240 For more information about Charging Batteries see Quick Setup Guide.