Vatech EzRay Air Wall User Manual page 78

A.4 Electromagnetic Compatibility (EMC) Information
Guidance and manufacturer's declaration - electromagnetic emissions
The VEX-S300W is intended for use in the electromagnetic environment specified
below. The customer or the user of the VEX-S300W should assure that it is used in
such an environment.
Emissions test
RF emissions CISPR 11
RF emissions CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations / flicker
emissions
IEC 61000-3-3
NOTE) the actual RF shielding effectiveness and filter attenuation of the shielded
location must be verified to ensure that they meet or exceed the specified minimum
values.
EzRay Air Wall (VEX-S300W) User Manual
Compliance
The VEX-S300W uses RF
energy only for its internal
function. Therefore, its RF
Group 1 emissions are very low and
are not likely to cause any
interference in nearby
electronic equipment.
The VEX-S300W is suitable
Class A
for use in all establishments
and may be used in domestic
Applicable
establishments and those
directly connected to the
public low-voltage power
supply network that supplies
Applicable
buildings used for domestic
purposes.
Appendix
Electromagnetic
environment - guidance
69