Dimm Installation; Dimm Removal - Supermicro SuperWorkstation SYS-531A-IL User Manual

DIMM Installation

1. Insert DIMM modules in the following
order: DIMMA2, DIMMB2, then DIMMA1,
DIMMB1. For the system to work properly,
use memory modules of the same type
and speed.
2. Align the DIMM module key with the
receptive point on the single-latch DIMM
slot.
3. Push the release tab outwards to unlock
the slot.
4. Press both ends of the module straight
down into the slot until the module snaps
into place.
5. Push the release tab to the lock position to
secure the module into the slot.

DIMM Removal

Reverse the steps above to remove the DIMM
modules from the motherboard.
Chapter 3: Maintenance and Component Installation
AUDIO_FP
BMC_HB_LED
JPAC1
COM1
USB2/3
JTPM1
PCI-E M.2-M2
SP1
JF1
JD1
JBT1
JPME2
JLED1
BT1
JSTBY1
PCI-E M.2-M1
JSD1
JL1
JWD1
I-SATA0 I-SATA2 I-SATA4
I-SATA1 I-SATA3 I-SATA5
Receptive Point
Release Tab
29
DVI
AUDIO
LAN2 LAN1 USB0/1
USB8/9 (3.2 (10Gb)) USB7 (3.2 (10Gb))
USB10 (3.2 (20Gb))
JPL2
CPU_FAN1
JPL1
MAC CODE
PCI-E M.2-M3
BMC CODE
BAR CODE
BIOS LICENSE
CATERR_LED
X13SAE
REV:1.00
DESIGNED IN USA
MAC CODE
DIMMA1
DIMMA2
DIMMB1
DIMMB2
PCH
USB11 (USB3.2 (20Gb))
USB4/5 (USB3.2 (5Gb)) USB6 (USB3.2 (5Gb))
JPW1
SYS_FAN2
I-SATA6
I-SATA7
Notch
Push both ends straight
down into the memory slot.
DP
HDMI
JPW2
CPU_FAN2
12V_PUMP_PWR1
JPI2C1
SYS_FAN1