Table of Contents
Advertisement
3.3 Processor and Heatsink Installation
•
Use ESD protection.
•
Unplug the AC power cord from all power supply after shutting down the system.
•
Check that the plastic protective cover is on the CPU socket and none of the socket pins
are bent. If they are, contact your retailer.
•
When handling the processor, avoid touching or placing direct pressure on the LGA lands
(gold contacts). Improper installation or socket misalignment can cause serious damage
to the processor or CPU socket, which may require manufacturer repairs.
•
Thermal grease is pre-applied on a new heatsink. No additional thermal grease is needed.
•
Refer to the Supermicro website for updates on processor support.
•
All graphics in this manual are for illustrations only. Your components may look different.
Installing a LGA1700 CPU
1. Remove the plastic protective cover from the load plate.
Plastic
protective cover
Load Lever
Chapter 3: Maintenance and Component Installation
21
Load Plate
Advertisement
Table of Contents
Troubleshooting
